3.16.61-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Steffen Maier maier@linux.ibm.com
commit 512857a795cbbda5980efa4cdb3c0b6602330408 upstream.
If a SCSI device is deleted during scsi_eh host reset, we cannot get a reference to the SCSI device anymore since scsi_device_get returns !=0 by design. Assuming the recovery of adapter and port(s) was successful, zfcp_erp_strategy_followup_success() attempts to trigger a LUN reset for the half-gone SCSI device. Unfortunately, it causes the following confusing trace record which states that zfcp will do a LUN recovery as "ERP need" is ZFCP_ERP_ACTION_REOPEN_LUN == 1 and equals "ERP want".
Old example trace record formatted with zfcpdbf from s390-tools:
Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ZFCP_STATUS_COMMON_RUNNING but not ZFCP_STATUS_COMMON_UNBLOCKED as it was closed on close part of adapter reopen ERP want : 0x01 ERP need : 0x01 misleading
However, zfcp_erp_setup_act() returns NULL as it cannot get the reference. Hence, zfcp_erp_action_enqueue() takes an early goto out and _NO_ recovery actually happens.
We always do want the recovery trigger trace record even if no erp_action could be enqueued as in this case. For other cases where we did not enqueue an erp_action, 'need' has always been zero to indicate this. In order to indicate above goto out, introduce an eyecatcher "flag" to mark the "ERP need" as 'not needed' but still keep the information which erp_action type, that zfcp_erp_required_act() had decided upon, is needed. 0xc_ is chosen to be visibly different from 0x0_ in "ERP want".
New example trace record formatted with zfcpdbf from s390-tools:
Tag: : ersfs_3 ERP, trigger, unit reopen, port reopen succeeded LUN : 0x<FCP_LUN> WWPN : 0x<WWPN> D_ID : 0x<N_Port-ID> Adapter status : 0x5400050b Port status : 0x54000001 LUN status : 0x40000000 ERP want : 0x01 ERP need : 0xc1 would need LUN ERP, but no action set up ^
Before v2.6.38 commit ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") we could detect this case because the "erp_action" field in the trace was NULL. The rework removed erp_action as argument and field from the trace.
This patch here is for tracing. A fix to allow LUN recovery in the case at hand is a topic for a separate patch.
See also commit fdbd1c5e27da ("[SCSI] zfcp: Allow running unit/LUN shutdown without acquiring reference") for a similar case and background info.
Signed-off-by: Steffen Maier maier@linux.ibm.com Fixes: ae0904f60fab ("[SCSI] zfcp: Redesign of the debug tracing for recovery actions.") Reviewed-by: Benjamin Block bblock@linux.ibm.com Signed-off-by: Martin K. Petersen martin.petersen@oracle.com [bwh: Backported to 3.16: adjust context] Signed-off-by: Ben Hutchings ben@decadent.org.uk --- drivers/s390/scsi/zfcp_erp.c | 16 +++++++++++++++- 1 file changed, 15 insertions(+), 1 deletion(-)
--- a/drivers/s390/scsi/zfcp_erp.c +++ b/drivers/s390/scsi/zfcp_erp.c @@ -34,11 +34,23 @@ enum zfcp_erp_steps { ZFCP_ERP_STEP_LUN_OPENING = 0x2000, };
+/** + * enum zfcp_erp_act_type - Type of ERP action object. + * @ZFCP_ERP_ACTION_REOPEN_LUN: LUN recovery. + * @ZFCP_ERP_ACTION_REOPEN_PORT: Port recovery. + * @ZFCP_ERP_ACTION_REOPEN_PORT_FORCED: Forced port recovery. + * @ZFCP_ERP_ACTION_REOPEN_ADAPTER: Adapter recovery. + * @ZFCP_ERP_ACTION_NONE: Eyecatcher pseudo flag to bitwise or-combine with + * either of the other enum values. + * Used to indicate that an ERP action could not be + * set up despite a detected need for some recovery. + */ enum zfcp_erp_act_type { ZFCP_ERP_ACTION_REOPEN_LUN = 1, ZFCP_ERP_ACTION_REOPEN_PORT = 2, ZFCP_ERP_ACTION_REOPEN_PORT_FORCED = 3, ZFCP_ERP_ACTION_REOPEN_ADAPTER = 4, + ZFCP_ERP_ACTION_NONE = 0xc0, };
enum zfcp_erp_act_state { @@ -256,8 +268,10 @@ static int zfcp_erp_action_enqueue(int w goto out;
act = zfcp_erp_setup_act(need, act_status, adapter, port, sdev); - if (!act) + if (!act) { + need |= ZFCP_ERP_ACTION_NONE; /* marker for trace */ goto out; + } atomic_set_mask(ZFCP_STATUS_ADAPTER_ERP_PENDING, &adapter->status); ++adapter->erp_total_count; list_add_tail(&act->list, &adapter->erp_ready_head);