From: Christian Hitz christian.hitz@bbv.ch
led_banks contains LED module number(s) that should be grouped into the module bank. led_banks is 0-initialized. By checking the led_banks entries for 0, un-set entries are detected. But a 0-entry also indicates that LED module 0 should be grouped into the module bank.
By only iterating over the available entries no check for unused entries is required and LED module 0 can be added to bank.
Signed-off-by: Christian Hitz christian.hitz@bbv.ch Cc: stable@vger.kernel.org --- drivers/leds/leds-lp50xx.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/leds/leds-lp50xx.c b/drivers/leds/leds-lp50xx.c index 94f8ef6b482c..d50c7f3e8f99 100644 --- a/drivers/leds/leds-lp50xx.c +++ b/drivers/leds/leds-lp50xx.c @@ -341,17 +341,15 @@ static int lp50xx_brightness_set(struct led_classdev *cdev, return ret; }
-static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[]) +static int lp50xx_set_banks(struct lp50xx *priv, u32 led_banks[], int num_leds) { u8 led_config_lo, led_config_hi; u32 bank_enable_mask = 0; int ret; int i;
- for (i = 0; i < priv->chip_info->max_modules; i++) { - if (led_banks[i]) - bank_enable_mask |= (1 << led_banks[i]); - } + for (i = 0; i < num_leds; i++) + bank_enable_mask |= (1 << led_banks[i]);
led_config_lo = bank_enable_mask; led_config_hi = bank_enable_mask >> 8; @@ -405,7 +403,7 @@ static int lp50xx_probe_leds(struct fwnode_handle *child, struct lp50xx *priv, return ret; }
- ret = lp50xx_set_banks(priv, led_banks); + ret = lp50xx_set_banks(priv, led_banks, num_leds); if (ret) { dev_err(priv->dev, "Cannot setup banked LEDs\n"); return ret;