From: Mario Limonciello mario.limonciello@amd.com
[ Upstream commit dff6139015dc68e93be3822a7bd406a1d138628b ]
acpi_pci_bridge_d3(dev) returns "true" if "dev" is a hotplug bridge that can handle hotplug events while in D3. Previously this meant either:
- "dev" has a _PS0 or _PR0 method (acpi_pci_power_manageable()), or
- The Root Port above "dev" has a _DSD with a "HotPlugSupportInD3" property with value 1.
This did not consider _PRW, which tells us about wakeup GPEs (ACPI v6.4, sec 7.3.13). Without a wakeup GPE, from an ACPI perspective the Root Port has no way of generating wakeup signals, so hotplug events will be lost if we use D3.
Similarly, it did not consider _S0W, which tells us the deepest D-state from which a device can wake itself (sec 7.3.20). If _S0W tells us the device cannot wake from D3, hotplug events will again be lost if we use D3.
Some platforms, e.g., AMD Yellow Carp, supply "HotPlugSupportInD3" without _PRW or with an _S0W that says the Root Port cannot wake from D3. On those platforms, we previously put bridges in D3hot, hotplug events were lost, and hotplugged devices would not be recognized without manually rescanning.
Allow bridges to be put in D3 only if the Root Port can generate wakeup GPEs (wakeup.flags.valid), it can wake from D3 (_S0W), AND it has the "HotPlugSupportInD3" property.
Neither Windows 10 nor Windows 11 puts the bridge in D3 when the firmware is configured this way, and this change aligns the handling of the situation to be the same.
[bhelgaas: commit log, tidy "HotPlugSupportInD3" check and comment] Link: https://uefi.org/htmlspecs/ACPI_Spec_6_4_html/07_Power_and_Performance_Mgmt/... Link: https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-r... Link: https://lore.kernel.org/r/20220401034003.3166-1-mario.limonciello@amd.com Fixes: 26ad34d510a87 ("PCI / ACPI: Whitelist D3 for more PCIe hotplug ports") Signed-off-by: Mario Limonciello mario.limonciello@amd.com Signed-off-by: Bjorn Helgaas bhelgaas@google.com Reviewed-by: Rafael J. Wysocki rafael.j.wysocki@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/pci/pci-acpi.c | 41 ++++++++++++++++++++++++++++++----------- 1 file changed, 30 insertions(+), 11 deletions(-)
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c index a42dbf448860..1243e2156ac8 100644 --- a/drivers/pci/pci-acpi.c +++ b/drivers/pci/pci-acpi.c @@ -974,9 +974,11 @@ bool acpi_pci_power_manageable(struct pci_dev *dev)
bool acpi_pci_bridge_d3(struct pci_dev *dev) { - const union acpi_object *obj; - struct acpi_device *adev; struct pci_dev *rpdev; + struct acpi_device *adev; + acpi_status status; + unsigned long long state; + const union acpi_object *obj;
if (acpi_pci_disabled || !dev->is_hotplug_bridge) return false; @@ -985,12 +987,6 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev) if (acpi_pci_power_manageable(dev)) return true;
- /* - * The ACPI firmware will provide the device-specific properties through - * _DSD configuration object. Look for the 'HotPlugSupportInD3' property - * for the root port and if it is set we know the hierarchy behind it - * supports D3 just fine. - */ rpdev = pcie_find_root_port(dev); if (!rpdev) return false; @@ -999,11 +995,34 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev) if (!adev) return false;
- if (acpi_dev_get_property(adev, "HotPlugSupportInD3", - ACPI_TYPE_INTEGER, &obj) < 0) + /* + * If the Root Port cannot signal wakeup signals at all, i.e., it + * doesn't supply a wakeup GPE via _PRW, it cannot signal hotplug + * events from low-power states including D3hot and D3cold. + */ + if (!adev->wakeup.flags.valid) return false;
- return obj->integer.value == 1; + /* + * If the Root Port cannot wake itself from D3hot or D3cold, we + * can't use D3. + */ + status = acpi_evaluate_integer(adev->handle, "_S0W", NULL, &state); + if (ACPI_SUCCESS(status) && state < ACPI_STATE_D3_HOT) + return false; + + /* + * The "HotPlugSupportInD3" property in a Root Port _DSD indicates + * the Port can signal hotplug events while in D3. We assume any + * bridges *below* that Root Port can also signal hotplug events + * while in D3. + */ + if (!acpi_dev_get_property(adev, "HotPlugSupportInD3", + ACPI_TYPE_INTEGER, &obj) && + obj->integer.value == 1) + return true; + + return false; }
int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)