6.13-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dragan Simic dsimic@manjaro.org
commit bd1c959f37f384b477f51572331b0dc828bd009a upstream.
Add missing "avdd-0v9-supply" and "avdd-1v8-supply" properties to the "hdmi" node in the Pine64 RockPro64 board dtsi file. To achieve this, also add the associated "vcca_0v9" regulator that produces the 0.9 V supply, [1][2] which hasn't been defined previously in the board dtsi file.
This also eliminates the following warnings from the kernel log:
dwhdmi-rockchip ff940000.hdmi: supply avdd-0v9 not found, using dummy regulator dwhdmi-rockchip ff940000.hdmi: supply avdd-1v8 not found, using dummy regulator
There are no functional changes to the way board works with these additions, because the "vcc1v8_dvp" and "vcca_0v9" regulators are always enabled, [1][2] but these additions improve the accuracy of hardware description.
These changes apply to the both supported hardware revisions of the Pine64 RockPro64, i.e. to the production-run revisions 2.0 and 2.1. [1][2]
[1] https://files.pine64.org/doc/rockpro64/rockpro64_v21-SCH.pdf [2] https://files.pine64.org/doc/rockpro64/rockpro64_v20-SCH.pdf
Fixes: e4f3fb490967 ("arm64: dts: rockchip: add initial dts support for Rockpro64") Cc: stable@vger.kernel.org Suggested-by: Diederik de Haas didi.debian@cknow.org Signed-off-by: Dragan Simic dsimic@manjaro.org Tested-by: Diederik de Haas didi.debian@cknow.org Link: https://lore.kernel.org/r/df3d7e8fe74ed5e727e085b18c395260537bb5ac.174094109... Signed-off-by: Heiko Stuebner heiko@sntech.de Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)
--- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -227,6 +227,16 @@ vin-supply = <&vcc12v_dcin>; };
+ vcca_0v9: regulator-vcca-0v9 { + compatible = "regulator-fixed"; + regulator-name = "vcca_0v9"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + vin-supply = <&vcc3v3_sys>; + }; + vdd_log: regulator-vdd-log { compatible = "pwm-regulator"; pwms = <&pwm2 0 25000 1>; @@ -312,6 +322,8 @@ };
&hdmi { + avdd-0v9-supply = <&vcca_0v9>; + avdd-1v8-supply = <&vcc1v8_dvp>; ddc-i2c-bus = <&i2c3>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_cec>;