On Mon, 7 Apr 2025, Mario Limonciello wrote:
From: Mario Limonciello mario.limonciello@amd.com
On some platforms it has been observed that STT limits are not being applied
properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen Yijun.Shen@dell.com
Fixes: 7c45534afa443 ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-By: Yijun Shen Yijun_Shen@Dell.com
Signed-off-by: Mario Limonciello mario.limonciello@amd.com
v2:
- Handle cases for auto-mode, cnqf, and sps as well
drivers/platform/x86/amd/pmf/auto-mode.c | 4 ++--
drivers/platform/x86/amd/pmf/cnqf.c | 4 ++--
drivers/platform/x86/amd/pmf/sps.c | 8 ++++----
drivers/platform/x86/amd/pmf/tee-if.c | 4 ++--
4 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/drivers/platform/x86/amd/pmf/auto-mode.c b/drivers/platform/x86/amd/pmf/auto-mode.c
index 02ff68be10d01..df37f8a84a007 100644
--- a/drivers/platform/x86/amd/pmf/auto-mode.c
+++ b/drivers/platform/x86/amd/pmf/auto-mode.c
@@ -120,9 +120,9 @@ static void amd_pmf_set_automode(struct amd_pmf_dev *dev, int idx,
amd_pmf_send_cmd(dev, SET_SPPT_APU_ONLY, false, pwr_ctrl->sppt_apu_only, NULL);
amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false, pwr_ctrl->stt_min, NULL);
amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false,
Hi Mario,
Could we add some helper on constructing the fixed-point number from the
integer part as this magic shifting makes the intent somewhat harder to
follow just by reading the code itself?
I hoped that include/linux/ would have had something for this but it seems
generic fixed-point helpers are almost non-existing except for very
specific use cases such as averages so maybe add a helper only for this
driver for now as this will be routed through fixes branch so doing random
things i include/linux/ might not be preferrable and would require larger
review audience.
What I mean for general helpers is that it would be nice to have something
like DECLARE_FIXEDPOINT() similar to DECLARE_EWMA() macro (and maybe a
signed variant too) which creates a few helper functions for the given
name prefix. It seems there's plenty of code which would benefit from such
helpers and would avoid the need to comment the fixed-point operations
(not to speak of how many of such ops likely lack the comment). So at
least keep that in mind for naming the helpers so the conversion to
a generic helper could be done smoothly.
--
i.
> amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false,
> - pwr_ctrl->stt_skin_temp[STT_TEMP_HS2], NULL);
> + pwr_ctrl->stt_skin_temp[STT_TEMP_HS2] << 8, NULL);
>
> if (is_apmf_func_supported(dev, APMF_FUNC_SET_FAN_IDX))
> apmf_update_fan_idx(dev, config_store.mode_set[idx].fan_control.manual,
> diff --git a/drivers/platform/x86/amd/pmf/cnqf.c b/drivers/platform/x86/amd/pmf/cnqf.c
> index bc8899e15c914..6a5ecc05961d9 100644
> --- a/drivers/platform/x86/amd/pmf/cnqf.c
> +++ b/drivers/platform/x86/amd/pmf/cnqf.c
> @@ -81,9 +81,9 @@ static int amd_pmf_set_cnqf(struct amd_pmf_dev *dev, int src, int idx,
> amd_pmf_send_cmd(dev, SET_SPPT, false, pc->sppt, NULL);
> amd_pmf_send_cmd(dev, SET_SPPT_APU_ONLY, false, pc->sppt_apu_only, NULL);
> amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false, pc->stt_min, NULL);
> - amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, pc->stt_skin_temp[STT_TEMP_APU],
> + amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, pc->stt_skin_temp[STT_TEMP_APU] << 8,
> NULL);
> - amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, pc->stt_skin_temp[STT_TEMP_HS2],
> + amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, pc->stt_skin_temp[STT_TEMP_HS2] << 8,
> NULL);
>
> if (is_apmf_func_supported(dev, APMF_FUNC_SET_FAN_IDX))
> diff --git a/drivers/platform/x86/amd/pmf/sps.c b/drivers/platform/x86/amd/pmf/sps.c
> index d3083383f11fb..ec10db1bfa5ec 100644
> --- a/drivers/platform/x86/amd/pmf/sps.c
> +++ b/drivers/platform/x86/amd/pmf/sps.c
> @@ -198,9 +198,9 @@ static void amd_pmf_update_slider_v2(struct amd_pmf_dev *dev, int idx)
> amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false,
> apts_config_store.val[idx].stt_min_limit, NULL);
> amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false,
> - apts_config_store.val[idx].stt_skin_temp_limit_apu, NULL);
> + apts_config_store.val[idx].stt_skin_temp_limit_apu << 8, NULL);
> amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false,
> - apts_config_store.val[idx].stt_skin_temp_limit_hs2, NULL);
> + apts_config_store.val[idx].stt_skin_temp_limit_hs2 << 8, NULL);
> }
>
> void amd_pmf_update_slider(struct amd_pmf_dev *dev, bool op, int idx,
> @@ -217,9 +217,9 @@ void amd_pmf_update_slider(struct amd_pmf_dev *dev, bool op, int idx,
> amd_pmf_send_cmd(dev, SET_STT_MIN_LIMIT, false,
> config_store.prop[src][idx].stt_min, NULL);
> amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false,
> - config_store.prop[src][idx].stt_skin_temp[STT_TEMP_APU], NULL);
> + config_store.prop[src][idx].stt_skin_temp[STT_TEMP_APU] << 8, NULL);
> amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false,
> - config_store.prop[src][idx].stt_skin_temp[STT_TEMP_HS2], NULL);
> + config_store.prop[src][idx].stt_skin_temp[STT_TEMP_HS2] << 8, NULL);
> } else if (op == SLIDER_OP_GET) {
> amd_pmf_send_cmd(dev, GET_SPL, true, ARG_NONE, &table->prop[src][idx].spl);
> amd_pmf_send_cmd(dev, GET_FPPT, true, ARG_NONE, &table->prop[src][idx].fppt);
> diff --git a/drivers/platform/x86/amd/pmf/tee-if.c b/drivers/platform/x86/amd/pmf/tee-if.c
> index d6a871f0d8ff2..7096923107929 100644
> --- a/drivers/platform/x86/amd/pmf/tee-if.c
> +++ b/drivers/platform/x86/amd/pmf/tee-if.c
> @@ -142,7 +142,7 @@ static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_
>
> case PMF_POLICY_STT_SKINTEMP_APU:
> if (dev->prev_data->stt_skintemp_apu != val) {
> - amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, val, NULL);
> + amd_pmf_send_cmd(dev, SET_STT_LIMIT_APU, false, val << 8, NULL);
> dev_dbg(dev->dev, "update STT_SKINTEMP_APU: %u\n", val);
> dev->prev_data->stt_skintemp_apu = val;
> }
> @@ -150,7 +150,7 @@ static void amd_pmf_apply_policies(struct amd_pmf_dev *dev, struct ta_pmf_enact_
>
> case PMF_POLICY_STT_SKINTEMP_HS2:
> if (dev->prev_data->stt_skintemp_hs2 != val) {
> - amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, val, NULL);
> + amd_pmf_send_cmd(dev, SET_STT_LIMIT_HS2, false, val << 8, NULL);
> dev_dbg(dev->dev, "update STT_SKINTEMP_HS2: %u\n", val);
> dev->prev_data->stt_skintemp_hs2 = val;
> }
>
