From: Vinod Koul vkoul@kernel.org
[ Upstream commit a968b5e9d5879f9535d6099505f9e14abcafb623 ]
RGMII_ID specifies that we should have internal delay, so resurrect the delay addition routine but under the RGMII_ID mode.
Fixes: 40269aa9f40a ("net: dsa: qca8k: disable delay for RGMII mode") Tested-by: Michal Vokáč michal.vokac@ysoft.com Signed-off-by: Vinod Koul vkoul@kernel.org Reviewed-by: Andrew Lunn andrew@lunn.ch Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/qca8k.c | 12 ++++++++++++ drivers/net/dsa/qca8k.h | 1 + 2 files changed, 13 insertions(+)
diff --git a/drivers/net/dsa/qca8k.c b/drivers/net/dsa/qca8k.c index 8e49974ffa0e..8ee59b20b47a 100644 --- a/drivers/net/dsa/qca8k.c +++ b/drivers/net/dsa/qca8k.c @@ -459,6 +459,18 @@ qca8k_set_pad_ctrl(struct qca8k_priv *priv, int port, int mode) qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); break; + case PHY_INTERFACE_MODE_RGMII_ID: + /* RGMII_ID needs internal delay. This is enabled through + * PORT5_PAD_CTRL for all ports, rather than individual port + * registers + */ + qca8k_write(priv, reg, + QCA8K_PORT_PAD_RGMII_EN | + QCA8K_PORT_PAD_RGMII_TX_DELAY(QCA8K_MAX_DELAY) | + QCA8K_PORT_PAD_RGMII_RX_DELAY(QCA8K_MAX_DELAY)); + qca8k_write(priv, QCA8K_REG_PORT5_PAD_CTRL, + QCA8K_PORT_PAD_RGMII_RX_DELAY_EN); + break; case PHY_INTERFACE_MODE_SGMII: qca8k_write(priv, reg, QCA8K_PORT_PAD_SGMII_EN); break; diff --git a/drivers/net/dsa/qca8k.h b/drivers/net/dsa/qca8k.h index 613fe5c50236..d146e54c8a6c 100644 --- a/drivers/net/dsa/qca8k.h +++ b/drivers/net/dsa/qca8k.h @@ -40,6 +40,7 @@ ((0x8 + (x & 0x3)) << 22) #define QCA8K_PORT_PAD_RGMII_RX_DELAY(x) \ ((0x10 + (x & 0x3)) << 20) +#define QCA8K_MAX_DELAY 3 #define QCA8K_PORT_PAD_RGMII_RX_DELAY_EN BIT(24) #define QCA8K_PORT_PAD_SGMII_EN BIT(7) #define QCA8K_REG_MODULE_EN 0x030