3.16.82-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Jeffrey Hugo jeffrey.l.hugo@gmail.com
commit b027ce258369cbfa88401a691c23dad01deb9f9b upstream.
hci_qca interfaces to the wcn3990 via a uart_dm on the msm8998 mtp and Lenovo Miix 630 laptop. As part of initializing the wcn3990, hci_qca disables flow, configures the uart baudrate, and then reenables flow - at which point an event is expected to be received over the uart from the wcn3990. It is observed that this event comes after the baudrate change but before hci_qca re-enables flow. This is unexpected, and is a result of msm_reset() being broken.
According to the uart_dm hardware documentation, it is recommended that automatic hardware flow control be enabled by setting RX_RDY_CTL. Auto hw flow control will manage RFR based on the configured watermark. When there is space to receive data, the hw will assert RFR. When the watermark is hit, the hw will de-assert RFR.
The hardware documentation indicates that RFR can me manually managed via CR when RX_RDY_CTL is not set. SET_RFR asserts RFR, and RESET_RFR de-asserts RFR.
msm_reset() is broken because after resetting the hardware, it unconditionally asserts RFR via SET_RFR. This enables flow regardless of the current configuration, and would undo a previous flow disable operation. It should instead de-assert RFR via RESET_RFR to block flow until the hardware is reconfigured. msm_serial should rely on the client to specify that flow should be enabled, either via mctrl() or the termios structure, and only assert RFR in response to those triggers.
Fixes: 04896a77a97b ("msm_serial: serial driver for MSM7K onboard serial peripheral.") Signed-off-by: Jeffrey Hugo jeffrey.l.hugo@gmail.com Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Reviewed-by: Andy Gross agross@kernel.org Link: https://lore.kernel.org/r/20191021154616.25457-1-jeffrey.l.hugo@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org Signed-off-by: Ben Hutchings ben@decadent.org.uk --- drivers/tty/serial/msm_serial.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-)
--- a/drivers/tty/serial/msm_serial.c +++ b/drivers/tty/serial/msm_serial.c @@ -316,6 +316,7 @@ static unsigned int msm_get_mctrl(struct static void msm_reset(struct uart_port *port) { struct msm_port *msm_port = UART_TO_MSM(port); + unsigned int mr;
/* reset everything */ msm_write(port, UART_CR_CMD_RESET_RX, UART_CR); @@ -323,7 +324,10 @@ static void msm_reset(struct uart_port * msm_write(port, UART_CR_CMD_RESET_ERR, UART_CR); msm_write(port, UART_CR_CMD_RESET_BREAK_INT, UART_CR); msm_write(port, UART_CR_CMD_RESET_CTS, UART_CR); - msm_write(port, UART_CR_CMD_SET_RFR, UART_CR); + msm_write(port, UART_CR_CMD_RESET_RFR, UART_CR); + mr = msm_read(port, UART_MR1); + mr &= ~UART_MR1_RX_RDY_CTL; + msm_write(port, mr, UART_MR1);
/* Disable DM modes */ if (msm_port->is_uartdm)