From: Achim Dahlhoff Achim.Dahlhoff@de.bosch.com
commit 6e7da74775348d96e2d7efaf3f91410e18c481ef upstream.
The tx_status poll in the rcar_dmac driver reads the status register which indicates which chunk is busy (DMACHCRB). Afterwards the point inside the chunk is read from DMATCRB. It is possible that the chunk has changed between the two reads. The result is a non-monotonous increase of the residue. Fix this by introducing a 'safe read' logic.
Fixes: 73a47bd0da66 ("dmaengine: rcar-dmac: use TCRB instead of TCR for residue") Signed-off-by: Achim Dahlhoff Achim.Dahlhoff@de.bosch.com Signed-off-by: Dirk Behme dirk.behme@de.bosch.com Reviewed-by: Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com Cc: stable@vger.kernel.org # v4.16+ Signed-off-by: Vinod Koul vkoul@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/dma/sh/rcar-dmac.c | 26 +++++++++++++++++++++++--- 1 file changed, 23 insertions(+), 3 deletions(-)
--- a/drivers/dma/sh/rcar-dmac.c +++ b/drivers/dma/sh/rcar-dmac.c @@ -1282,6 +1282,9 @@ static unsigned int rcar_dmac_chan_get_r enum dma_status status; unsigned int residue = 0; unsigned int dptr = 0; + unsigned int chcrb; + unsigned int tcrb; + unsigned int i;
if (!desc) return 0; @@ -1330,14 +1333,31 @@ static unsigned int rcar_dmac_chan_get_r }
/* + * We need to read two registers. + * Make sure the control register does not skip to next chunk + * while reading the counter. + * Trying it 3 times should be enough: Initial read, retry, retry + * for the paranoid. + */ + for (i = 0; i < 3; i++) { + chcrb = rcar_dmac_chan_read(chan, RCAR_DMACHCRB) & + RCAR_DMACHCRB_DPTR_MASK; + tcrb = rcar_dmac_chan_read(chan, RCAR_DMATCRB); + /* Still the same? */ + if (chcrb == (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) & + RCAR_DMACHCRB_DPTR_MASK)) + break; + } + WARN_ONCE(i >= 3, "residue might be not continuous!"); + + /* * In descriptor mode the descriptor running pointer is not maintained * by the interrupt handler, find the running descriptor from the * descriptor pointer field in the CHCRB register. In non-descriptor * mode just use the running descriptor pointer. */ if (desc->hwdescs.use) { - dptr = (rcar_dmac_chan_read(chan, RCAR_DMACHCRB) & - RCAR_DMACHCRB_DPTR_MASK) >> RCAR_DMACHCRB_DPTR_SHIFT; + dptr = chcrb >> RCAR_DMACHCRB_DPTR_SHIFT; if (dptr == 0) dptr = desc->nchunks; dptr--; @@ -1355,7 +1375,7 @@ static unsigned int rcar_dmac_chan_get_r }
/* Add the residue for the current chunk. */ - residue += rcar_dmac_chan_read(chan, RCAR_DMATCRB) << desc->xfer_shift; + residue += tcrb << desc->xfer_shift;
return residue; }