From: Linus Walleij linus.walleij@linaro.org
[ Upstream commit 760c80b70bed2cd01630e8595d1bbde910339f31 ]
We get this regression when using RTL8366RB as part of a bridge with OpenWrt:
WARNING: CPU: 0 PID: 1347 at net/switchdev/switchdev.c:291 switchdev_port_attr_set_now+0x80/0xa4 lan0: Commit of attribute (id=7) failed. (...) realtek-smi switch lan0: failed to initialize vlan filtering on this port
This is because it is trying to disable VLAN filtering on VLAN0, as we have forgot to add 1 to the port number to get the right VLAN in rtl8366_vlan_filtering(): when we initialize the VLAN we associate VLAN1 with port 0, VLAN2 with port 1 etc, so we need to add 1 to the port offset.
Fixes: d8652956cf37 ("net: dsa: realtek-smi: Add Realtek SMI driver") Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/dsa/rtl8366.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)
--- a/drivers/net/dsa/rtl8366.c +++ b/drivers/net/dsa/rtl8366.c @@ -307,7 +307,8 @@ int rtl8366_vlan_filtering(struct dsa_sw struct rtl8366_vlan_4k vlan4k; int ret;
- if (!smi->ops->is_vlan_valid(smi, port)) + /* Use VLAN nr port + 1 since VLAN0 is not valid */ + if (!smi->ops->is_vlan_valid(smi, port + 1)) return -EINVAL;
dev_info(smi->dev, "%s filtering on port %d\n", @@ -318,12 +319,12 @@ int rtl8366_vlan_filtering(struct dsa_sw * The hardware support filter ID (FID) 0..7, I have no clue how to * support this in the driver when the callback only says on/off. */ - ret = smi->ops->get_vlan_4k(smi, port, &vlan4k); + ret = smi->ops->get_vlan_4k(smi, port + 1, &vlan4k); if (ret) return ret;
/* Just set the filter to FID 1 for now then */ - ret = rtl8366_set_vlan(smi, port, + ret = rtl8366_set_vlan(smi, port + 1, vlan4k.member, vlan4k.untag, 1);