The patch below does not apply to the 5.4-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 6b0cc5dce0725ae8f1a2883514da731c55eeb35e Mon Sep 17 00:00:00 2001
From: Jonathan Cameron Jonathan.Cameron@huawei.com Date: Wed, 22 Jul 2020 16:50:53 +0100 Subject: [PATCH] iio:imu:inv_mpu6050 Fix dma and ts alignment and data leak issues.
This case is a bit different to the rest of the series. The driver was doing a regmap_bulk_read into a buffer that wasn't dma safe as it was on the stack with no guarantee of it being in a cacheline on it's own. Fixing that also dealt with the data leak and alignment issues that Lars-Peter pointed out.
Also removed some unaligned handling as we are now aligned.
Fixes tag is for the dma safe buffer issue. Potentially we would need to backport timestamp alignment futher but that is a totally different patch.
Fixes: fd64df16f40e ("iio: imu: inv_mpu6050: Add SPI support for MPU6000") Reported-by: Lars-Peter Clausen lars@metafoo.de Signed-off-by: Jonathan Cameron Jonathan.Cameron@huawei.com Reviewed-by: Andy Shevchenko andy.shevchenko@gmail.com Reviewed-by: Jean-Baptiste Maneyrol jmaneyrol@invensense.com Cc: Stable@vger.kernel.org Link: https://lore.kernel.org/r/20200722155103.979802-18-jic23@kernel.org
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h index cd38b3fccc7b..eb522b38acf3 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h @@ -122,6 +122,13 @@ struct inv_mpu6050_chip_config { u8 user_ctrl; };
+/* + * Maximum of 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8. + * May be less if fewer channels are enabled, as long as the timestamp + * remains 8 byte aligned + */ +#define INV_MPU6050_OUTPUT_DATA_SIZE 32 + /** * struct inv_mpu6050_hw - Other important hardware information. * @whoami: Self identification byte from WHO_AM_I register @@ -165,6 +172,7 @@ struct inv_mpu6050_hw { * @magn_raw_to_gauss: coefficient to convert mag raw value to Gauss. * @magn_orient: magnetometer sensor chip orientation if available. * @suspended_sensors: sensors mask of sensors turned off for suspend + * @data: dma safe buffer used for bulk reads. */ struct inv_mpu6050_state { struct mutex lock; @@ -190,6 +198,7 @@ struct inv_mpu6050_state { s32 magn_raw_to_gauss[3]; struct iio_mount_matrix magn_orient; unsigned int suspended_sensors; + u8 data[INV_MPU6050_OUTPUT_DATA_SIZE] ____cacheline_aligned; };
/*register and associated bit definition*/ @@ -334,9 +343,6 @@ struct inv_mpu6050_state { #define INV_ICM20608_TEMP_OFFSET 8170 #define INV_ICM20608_TEMP_SCALE 3059976
-/* 6 + 6 + 2 + 7 (for MPU9x50) = 21 round up to 24 and plus 8 */ -#define INV_MPU6050_OUTPUT_DATA_SIZE 32 - #define INV_MPU6050_REG_INT_PIN_CFG 0x37 #define INV_MPU6050_ACTIVE_HIGH 0x00 #define INV_MPU6050_ACTIVE_LOW 0x80 diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c index b533fa2dad0a..d8e6b88ddffc 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_ring.c @@ -13,7 +13,6 @@ #include <linux/interrupt.h> #include <linux/poll.h> #include <linux/math64.h> -#include <asm/unaligned.h> #include "inv_mpu_iio.h"
/** @@ -121,7 +120,6 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) struct inv_mpu6050_state *st = iio_priv(indio_dev); size_t bytes_per_datum; int result; - u8 data[INV_MPU6050_OUTPUT_DATA_SIZE]; u16 fifo_count; s64 timestamp; int int_status; @@ -160,11 +158,11 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) * read fifo_count register to know how many bytes are inside the FIFO * right now */ - result = regmap_bulk_read(st->map, st->reg->fifo_count_h, data, - INV_MPU6050_FIFO_COUNT_BYTE); + result = regmap_bulk_read(st->map, st->reg->fifo_count_h, + st->data, INV_MPU6050_FIFO_COUNT_BYTE); if (result) goto end_session; - fifo_count = get_unaligned_be16(&data[0]); + fifo_count = be16_to_cpup((__be16 *)&st->data[0]);
/* * Handle fifo overflow by resetting fifo. @@ -182,7 +180,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) inv_mpu6050_update_period(st, pf->timestamp, nb); for (i = 0; i < nb; ++i) { result = regmap_bulk_read(st->map, st->reg->fifo_r_w, - data, bytes_per_datum); + st->data, bytes_per_datum); if (result) goto flush_fifo; /* skip first samples if needed */ @@ -191,7 +189,7 @@ irqreturn_t inv_mpu6050_read_fifo(int irq, void *p) continue; } timestamp = inv_mpu6050_get_timestamp(st); - iio_push_to_buffers_with_timestamp(indio_dev, data, timestamp); + iio_push_to_buffers_with_timestamp(indio_dev, st->data, timestamp); }
end_session: