Since commit d24cfee7f63d ("spi: Fix acpi deferred irq probe"), the acpi_dev_gpio_irq_get() call gets delayed till spi_probe() is called on the SPI device.
If there is no driver for the SPI device then the move to spi_probe() results in acpi_dev_gpio_irq_get() never getting called. This may cause problems by leaving the GPIO pin floating because this call is responsible for setting up the GPIO pin direction and/or bias according to the values from the ACPI tables.
Re-add the removed acpi_dev_gpio_irq_get() in acpi_register_spi_device() to ensure the GPIO pin is always correctly setup, while keeping the acpi_dev_gpio_irq_get() call added to spi_probe() to deal with -EPROBE_DEFER returns caused by the GPIO controller not having a driver yet.
Link: https://bbs.archlinux.org/viewtopic.php?id=302348 Fixes: d24cfee7f63d ("spi: Fix acpi deferred irq probe") Cc: stable@vger.kernel.org Signed-off-by: Hans de Goede hansg@kernel.org --- drivers/spi/spi.c | 10 ++++++++++ 1 file changed, 10 insertions(+)
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2e0647a06890..8588e8562220 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2851,6 +2851,16 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr, acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias, sizeof(spi->modalias));
+ /* + * This gets re-tried in spi_probe() for -EPROBE_DEFER handling in case + * the GPIO controller does not have a driver yet. This needs to be done + * here too, because this call sets the GPIO direction and/or bias. + * Setting these needs to be done even if there is no driver, in which + * case spi_probe() will never get called. + */ + if (spi->irq < 0) + spi->irq = acpi_dev_gpio_irq_get(adev, 0); + acpi_device_set_enumerated(adev);
adev->power.flags.ignore_parent = true;