From: Pawel Dembicki paweldembicki@gmail.com
[ Upstream commit de7a670f8defe4ed2115552ad23dea0f432f7be4 ]
When the vsc73xx mdio bus work properly, the generic autonegotiation configuration works well.
Reviewed-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Pawel Dembicki paweldembicki@gmail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/phy/vitesse.c | 14 -------------- 1 file changed, 14 deletions(-)
diff --git a/drivers/net/phy/vitesse.c b/drivers/net/phy/vitesse.c index fbf9ad429593c..697b07fdf3ec7 100644 --- a/drivers/net/phy/vitesse.c +++ b/drivers/net/phy/vitesse.c @@ -241,16 +241,6 @@ static int vsc739x_config_init(struct phy_device *phydev) return genphy_config_init(phydev); }
-static int vsc73xx_config_aneg(struct phy_device *phydev) -{ - /* The VSC73xx switches does not like to be instructed to - * do autonegotiation in any way, it prefers that you just go - * with the power-on/reset defaults. Writing some registers will - * just make autonegotiation permanently fail. - */ - return 0; -} - /* This adds a skew for both TX and RX clocks, so the skew should only be * applied to "rgmii-id" interfaces. It may not work as expected * on "rgmii-txid", "rgmii-rxid" or "rgmii" interfaces. */ @@ -459,7 +449,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, .features = PHY_GBIT_FEATURES, .config_init = vsc738x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, { @@ -468,7 +457,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, .features = PHY_GBIT_FEATURES, .config_init = vsc738x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, { @@ -477,7 +465,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, .features = PHY_GBIT_FEATURES, .config_init = vsc739x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, { @@ -486,7 +473,6 @@ static struct phy_driver vsc82xx_driver[] = { .phy_id_mask = 0x000ffff0, .features = PHY_GBIT_FEATURES, .config_init = vsc739x_config_init, - .config_aneg = vsc73xx_config_aneg, .read_page = vsc73xx_read_page, .write_page = vsc73xx_write_page, }, {