6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Robin Gong yibin.gong@nxp.com
[ Upstream commit 86d57d9c07d54e8cb385ffe800930816ccdba0c1 ]
Since sdma hardware configure postpone to transfer phase, have to disable dma request before dma transfer setup because there is a hardware limitation on sdma event enable(ENBLn) as below:
"It is thus essential for the Arm platform to program them before any DMA request is triggered to the SDMA, otherwise an unpredictable combination of channels may be started."
Signed-off-by: Carlos Song carlos.song@nxp.com Signed-off-by: Robin Gong yibin.gong@nxp.com Link: https://patch.msgid.link/20251024055320.408482-1-carlos.song@nxp.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-imx.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 13a6ebef01894..e929a5af38eea 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -503,9 +503,15 @@ static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx) { u32 reg;
- reg = readl(spi_imx->base + MX51_ECSPI_CTRL); - reg |= MX51_ECSPI_CTRL_XCH; - writel(reg, spi_imx->base + MX51_ECSPI_CTRL); + if (spi_imx->usedma) { + reg = readl(spi_imx->base + MX51_ECSPI_DMA); + reg |= MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN; + writel(reg, spi_imx->base + MX51_ECSPI_DMA); + } else { + reg = readl(spi_imx->base + MX51_ECSPI_CTRL); + reg |= MX51_ECSPI_CTRL_XCH; + writel(reg, spi_imx->base + MX51_ECSPI_CTRL); + } }
static void mx51_disable_dma(struct spi_imx_data *spi_imx) @@ -689,7 +695,6 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx) writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | MX51_ECSPI_DMA_TX_WML(tx_wml) | MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | - MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); }
@@ -1449,6 +1454,8 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, reinit_completion(&spi_imx->dma_tx_completion); dma_async_issue_pending(controller->dma_tx);
+ spi_imx->devtype_data->trigger(spi_imx); + transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len);
/* Wait SDMA to finish the data transfer.*/