4.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Michael Neuling mikey@neuling.org
commit 13a83eac373c49c0a081cbcd137e79210fe78acd upstream.
On boot we save the configuration space of PCIe bridges. We do this so when we get an EEH event and everything gets reset that we can restore them.
Unfortunately we save this state before we've enabled the MMIO space on the bridges. Hence if we have to reset the bridge when we come back MMIO is not enabled and we end up taking an PE freeze when the driver starts accessing again.
This patch forces the memory/MMIO and bus mastering on when restoring bridges on EEH. Ideally we'd do this correctly by saving the configuration space writes later, but that will have to come later in a larger EEH rewrite. For now we have this simple fix.
The original bug can be triggered on a boston machine by doing: echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound On boston, this PHB has a PCIe switch on it. Without this patch, you'll see two EEH events, 1 expected and 1 the failure we are fixing here. The second EEH event causes the anything under the PHB to disappear (i.e. the i40e eth).
With this patch, only 1 EEH event occurs and devices properly recover.
Fixes: 652defed4875 ("powerpc/eeh: Check PCIe link after reset") Cc: stable@vger.kernel.org # v3.11+ Reported-by: Pridhiviraj Paidipeddi ppaidipe@linux.vnet.ibm.com Signed-off-by: Michael Neuling mikey@neuling.org Acked-by: Russell Currey ruscur@russell.cc Signed-off-by: Michael Ellerman mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- arch/powerpc/kernel/eeh_pe.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
--- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -795,7 +795,8 @@ static void eeh_restore_bridge_bars(stru eeh_ops->write_config(pdn, 15*4, 4, edev->config_space[15]);
/* PCI Command: 0x4 */ - eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1]); + eeh_ops->write_config(pdn, PCI_COMMAND, 4, edev->config_space[1] | + PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
/* Check the PCIe link is ready */ eeh_bridge_check_link(edev);