From: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org
[ Upstream commit f84ccad5f5660f86a642a3d7e2bfdc4e7a8a2d49 ]
On QCOM platforms with EPSS flavour of cpufreq IP a throttled frequency is obtained from another register REG_DOMAIN_STATE, thus the helper function qcom_lmh_get_throttle_freq() should be modified accordingly, as for now it returns gibberish since .reg_current_vote is unset for EPSS hardware.
To exclude a hardcoded magic number 19200 it is replaced by "xo" clock rate in KHz.
Fixes: 275157b367f4 ("cpufreq: qcom-cpufreq-hw: Add dcvs interrupt support") Reviewed-by: Bjorn Andersson bjorn.andersson@linaro.org Signed-off-by: Vladimir Zapolskiy vladimir.zapolskiy@linaro.org Signed-off-by: Viresh Kumar viresh.kumar@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/cpufreq/qcom-cpufreq-hw.c | 17 +++++++++++------ 1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c index 60d38f62308a..1e99b71e7844 100644 --- a/drivers/cpufreq/qcom-cpufreq-hw.c +++ b/drivers/cpufreq/qcom-cpufreq-hw.c @@ -28,6 +28,7 @@
struct qcom_cpufreq_soc_data { u32 reg_enable; + u32 reg_domain_state; u32 reg_freq_lut; u32 reg_volt_lut; u32 reg_current_vote; @@ -267,11 +268,16 @@ static void qcom_get_related_cpus(int index, struct cpumask *m) } }
-static unsigned int qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data) +static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data) { - unsigned int val = readl_relaxed(data->base + data->soc_data->reg_current_vote); + unsigned int lval;
- return (val & 0x3FF) * 19200; + if (data->soc_data->reg_current_vote) + lval = readl_relaxed(data->base + data->soc_data->reg_current_vote) & 0x3ff; + else + lval = readl_relaxed(data->base + data->soc_data->reg_domain_state) & 0xff; + + return lval * xo_rate; }
static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) @@ -281,14 +287,12 @@ static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data) struct device *dev = get_cpu_device(cpu); unsigned long freq_hz, throttled_freq; struct dev_pm_opp *opp; - unsigned int freq;
/* * Get the h/w throttled frequency, normalize it using the * registered opp table and use it to calculate thermal pressure. */ - freq = qcom_lmh_get_throttle_freq(data); - freq_hz = freq * HZ_PER_KHZ; + freq_hz = qcom_lmh_get_throttle_freq(data);
opp = dev_pm_opp_find_freq_floor(dev, &freq_hz); if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE) @@ -357,6 +361,7 @@ static const struct qcom_cpufreq_soc_data qcom_soc_data = {
static const struct qcom_cpufreq_soc_data epss_soc_data = { .reg_enable = 0x0, + .reg_domain_state = 0x20, .reg_freq_lut = 0x100, .reg_volt_lut = 0x200, .reg_perf_state = 0x320,