6.11-stable review patch. If anyone has any objections, please let me know.
------------------
From: Dragan Simic dsimic@manjaro.org
[ Upstream commit 0d214f27c0e3d9694284c95bac1502c2d247355b ]
The rk808-regulator driver supports multiple PMIC variants from the Rockckip RK80x and RK81x series, but the DVS GPIOs are supported on the RK808 variant only, according to the DT bindings [1][2][3][4][5][6] and the datasheets for the supported PMIC variants. [7][8][9][10][11][12]
Thus, change the probe path so the "dvs-gpios" property is checked for and its value possibly used only when the handled PMIC variant is RK808. There's no point in doing that on the other PMIC variants, because they don't support the DVS GPIOs, and it goes against the DT bindings to allow a possible out- of-place "dvs-gpios" property to actually be handled in the driver.
This eliminates the following messages, emitted when the "dvs-gpios" property isn't found in the DT, from the kernel log on boards that actually don't use the RK808 variant, which may have provided a source of confusion:
rk808-regulator rk808-regulator.2.auto: there is no dvs0 gpio rk808-regulator rk808-regulator.2.auto: there is no dvs1 gpio
Furthermore, demote these kernel messages to debug messages, because they are useful during the board bringup phase only. Emitting them afterwards, on the boards that use the RK808 variant, but actually don't use the DVS0/1 GPIOs, clutters the kernel log a bit, while they provide no value and may actually cause false impression that some PMIC-related issues are present.
[1] Documentation/devicetree/bindings/mfd/rockchip,rk805.yaml [2] Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml [3] Documentation/devicetree/bindings/mfd/rockchip,rk808.yaml [4] Documentation/devicetree/bindings/mfd/rockchip,rk816.yaml [5] Documentation/devicetree/bindings/mfd/rockchip,rk817.yaml [6] Documentation/devicetree/bindings/mfd/rockchip,rk818.yaml [7] https://rockchip.fr/RK805%20datasheet%20V1.2.pdf [8] https://wmsc.lcsc.com/wmsc/upload/file/pdf/v2/lcsc/2401261533_Rockchip-RK806... [9] https://rockchip.fr/RK808%20datasheet%20V1.4.pdf [10] https://rockchip.fr/RK816%20datasheet%20V1.3.pdf [11] https://rockchip.fr/RK817%20datasheet%20V1.01.pdf [12] https://rockchip.fr/RK818%20datasheet%20V1.0.pdf
Fixes: 11375293530b ("regulator: rk808: Add regulator driver for RK818") Reported-by: Diederik de Haas didi.debian@cknow.org Signed-off-by: Dragan Simic dsimic@manjaro.org Link: https://patch.msgid.link/9a415c59699e76fc7b88a2552520a4ca2538f44e.1728902488... Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/regulator/rk808-regulator.c | 15 ++++++++------- 1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c index 01a8d04879184..37476d2558fda 100644 --- a/drivers/regulator/rk808-regulator.c +++ b/drivers/regulator/rk808-regulator.c @@ -1853,7 +1853,7 @@ static int rk808_regulator_dt_parse_pdata(struct device *dev, }
if (!pdata->dvs_gpio[i]) { - dev_info(dev, "there is no dvs%d gpio\n", i); + dev_dbg(dev, "there is no dvs%d gpio\n", i); continue; }
@@ -1889,12 +1889,6 @@ static int rk808_regulator_probe(struct platform_device *pdev) if (!pdata) return -ENOMEM;
- ret = rk808_regulator_dt_parse_pdata(&pdev->dev, regmap, pdata); - if (ret < 0) - return ret; - - platform_set_drvdata(pdev, pdata); - switch (rk808->variant) { case RK805_ID: regulators = rk805_reg; @@ -1905,6 +1899,11 @@ static int rk808_regulator_probe(struct platform_device *pdev) nregulators = ARRAY_SIZE(rk806_reg); break; case RK808_ID: + /* DVS0/1 GPIOs are supported on the RK808 only */ + ret = rk808_regulator_dt_parse_pdata(&pdev->dev, regmap, pdata); + if (ret < 0) + return ret; + regulators = rk808_reg; nregulators = RK808_NUM_REGULATORS; break; @@ -1930,6 +1929,8 @@ static int rk808_regulator_probe(struct platform_device *pdev) return -EINVAL; }
+ platform_set_drvdata(pdev, pdata); + config.dev = &pdev->dev; config.driver_data = pdata; config.regmap = regmap;