From: Florian Fainelli f.fainelli@gmail.com
commit e1ff6fc22f19e2af8adbad618526b80067911d40 upstream.
At the time the brcmstb_thermal driver and its binding were merged, the DT binding did not make the coefficients properties a mandatory one, therefore all users of the brcmstb_thermal driver out there have a non functional implementation with zero coefficients. Even if these properties were provided, the formula used for computation is incorrect.
The coefficients are entirely process specific (right now, only 28nm is supported) and not board or SoC specific, it is therefore appropriate to hard code them in the driver given the compatibility string we are probed with which has to be updated whenever a new process is introduced.
We remove the existing coefficients definition since subsequent patches are going to add support for a new process and will introduce new coefficients as well.
Fixes: 9e03cf1b2dd5 ("thermal: add brcmstb AVS TMON driver") Signed-off-by: Florian Fainelli f.fainelli@gmail.com Reviewed-by: Amit Kucheria amit.kucheria@linaro.org Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Link: https://lore.kernel.org/r/20200114190607.29339-2-f.fainelli@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/thermal/broadcom/brcmstb_thermal.c | 31 ++++++++--------------------- 1 file changed, 9 insertions(+), 22 deletions(-)
--- a/drivers/thermal/broadcom/brcmstb_thermal.c +++ b/drivers/thermal/broadcom/brcmstb_thermal.c @@ -49,7 +49,7 @@ #define AVS_TMON_TP_TEST_ENABLE 0x20
/* Default coefficients */ -#define AVS_TMON_TEMP_SLOPE -487 +#define AVS_TMON_TEMP_SLOPE 487 #define AVS_TMON_TEMP_OFFSET 410040
/* HW related temperature constants */ @@ -108,23 +108,12 @@ struct brcmstb_thermal_priv { struct thermal_zone_device *thermal; };
-static void avs_tmon_get_coeffs(struct thermal_zone_device *tz, int *slope, - int *offset) -{ - *slope = thermal_zone_get_slope(tz); - *offset = thermal_zone_get_offset(tz); -} - /* Convert a HW code to a temperature reading (millidegree celsius) */ static inline int avs_tmon_code_to_temp(struct thermal_zone_device *tz, u32 code) { - const int val = code & AVS_TMON_TEMP_MASK; - int slope, offset; - - avs_tmon_get_coeffs(tz, &slope, &offset); - - return slope * val + offset; + return (AVS_TMON_TEMP_OFFSET - + (int)((code & AVS_TMON_TEMP_MAX) * AVS_TMON_TEMP_SLOPE)); }
/* @@ -136,20 +125,18 @@ static inline int avs_tmon_code_to_temp( static inline u32 avs_tmon_temp_to_code(struct thermal_zone_device *tz, int temp, bool low) { - int slope, offset; - if (temp < AVS_TMON_TEMP_MIN) - return AVS_TMON_TEMP_MAX; /* Maximum code value */ - - avs_tmon_get_coeffs(tz, &slope, &offset); + return AVS_TMON_TEMP_MAX; /* Maximum code value */
- if (temp >= offset) + if (temp >= AVS_TMON_TEMP_OFFSET) return 0; /* Minimum code value */
if (low) - return (u32)(DIV_ROUND_UP(offset - temp, abs(slope))); + return (u32)(DIV_ROUND_UP(AVS_TMON_TEMP_OFFSET - temp, + AVS_TMON_TEMP_SLOPE)); else - return (u32)((offset - temp) / abs(slope)); + return (u32)((AVS_TMON_TEMP_OFFSET - temp) / + AVS_TMON_TEMP_SLOPE); }
static int brcmstb_get_temp(void *data, int *temp)