From: Michał Mirosław mirq-linux@rere.qmqm.pl
commit eec6e3ee636ec3adaa85ebe4b4acaacfcf06277e upstream.
Add "compatible" string matching "vendor,chip" template and proper GPIO flags handling. Keep support for old name and reset polarity for older devicetrees.
Cc: stable@vger.kernel.org # d3a5bcb4a17f ("gpio: add gpiod_toggle_active_low()") Cc: stable@vger.kernel.org Fixes: 0096214a59a7 ("staging: wfx: add support for I/O access") Signed-off-by: Michał Mirosław mirq-linux@rere.qmqm.pl Link: https://lore.kernel.org/r/0e6dda06f145676861860f073a53dc95987c7ab5.158141684... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt | 7 ++--- drivers/staging/wfx/bus_spi.c | 14 +++++++--- 2 files changed, 14 insertions(+), 7 deletions(-)
--- a/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt +++ b/drivers/staging/wfx/Documentation/devicetree/bindings/net/wireless/siliabs,wfx.txt @@ -6,7 +6,7 @@ SPI You have to declare the WFxxx chip in your device tree.
Required properties: - - compatible: Should be "silabs,wfx-spi" + - compatible: Should be "silabs,wf200" - reg: Chip select address of device - spi-max-frequency: Maximum SPI clocking speed of device in Hz - interrupts-extended: Should contain interrupt line (interrupt-parent + @@ -15,6 +15,7 @@ Required properties: Optional properties: - reset-gpios: phandle of gpio that will be used to reset chip during probe. Without this property, you may encounter issues with warm boot. + (Legacy: when compatible == "silabs,wfx-spi", the gpio is inverted.)
Please consult Documentation/devicetree/bindings/spi/spi-bus.txt for optional SPI connection related properties, @@ -23,12 +24,12 @@ Example:
&spi1 { wfx { - compatible = "silabs,wfx-spi"; + compatible = "silabs,wf200"; pinctrl-names = "default"; pinctrl-0 = <&wfx_irq &wfx_gpios>; interrupts-extended = <&gpio 16 IRQ_TYPE_EDGE_RISING>; wakeup-gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; reg = <0>; spi-max-frequency = <42000000>; }; --- a/drivers/staging/wfx/bus_spi.c +++ b/drivers/staging/wfx/bus_spi.c @@ -27,6 +27,8 @@ MODULE_PARM_DESC(gpio_reset, "gpio numbe #define SET_WRITE 0x7FFF /* usage: and operation */ #define SET_READ 0x8000 /* usage: or operation */
+#define WFX_RESET_INVERTED 1 + static const struct wfx_platform_data wfx_spi_pdata = { .file_fw = "wfm_wf200", .file_pds = "wf200.pds", @@ -199,9 +201,11 @@ static int wfx_spi_probe(struct spi_devi if (!bus->gpio_reset) { dev_warn(&func->dev, "try to load firmware anyway\n"); } else { - gpiod_set_value(bus->gpio_reset, 0); - udelay(100); + if (spi_get_device_id(func)->driver_data & WFX_RESET_INVERTED) + gpiod_toggle_active_low(bus->gpio_reset); gpiod_set_value(bus->gpio_reset, 1); + udelay(100); + gpiod_set_value(bus->gpio_reset, 0); udelay(2000); }
@@ -243,14 +247,16 @@ static int wfx_spi_disconnect(struct spi * stripped. */ static const struct spi_device_id wfx_spi_id[] = { - { "wfx-spi", 0 }, + { "wfx-spi", WFX_RESET_INVERTED }, + { "wf200", 0 }, { }, }; MODULE_DEVICE_TABLE(spi, wfx_spi_id);
#ifdef CONFIG_OF static const struct of_device_id wfx_spi_of_match[] = { - { .compatible = "silabs,wfx-spi" }, + { .compatible = "silabs,wfx-spi", .data = (void *)WFX_RESET_INVERTED }, + { .compatible = "silabs,wf200" }, { }, }; MODULE_DEVICE_TABLE(of, wfx_spi_of_match);