when the battery is set to sbs-mode and no gpio detection is enabled "health" is always returning a value even when the battery is not present. All other fields return "not present". This leads to a scenario where the driver is constantly switching between "present" and "not present" state. This generates a lot of constant traffic on the i2c.
This commit changes the response of "health" to an error when the battery is not responding leading to a consistent "not present" state.
Fixes: 76b16f4cdfb8 ("power: supply: sbs-battery: don't assume MANUFACTURER_DATA formats")
Signed-off-by: Michael Nosthoff committed@heine.so Cc: Brian Norris briannorris@chromium.org Cc: stable@vger.kernel.org --- drivers/power/supply/sbs-battery.c | 25 ++++++++++++++++--------- 1 file changed, 16 insertions(+), 9 deletions(-)
diff --git a/drivers/power/supply/sbs-battery.c b/drivers/power/supply/sbs-battery.c index 2e86cc1e0e35..f8d74e9f7931 100644 --- a/drivers/power/supply/sbs-battery.c +++ b/drivers/power/supply/sbs-battery.c @@ -314,17 +314,22 @@ static int sbs_get_battery_presence_and_health( { int ret;
- if (psp == POWER_SUPPLY_PROP_PRESENT) { - /* Dummy command; if it succeeds, battery is present. */ - ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr); - if (ret < 0) - val->intval = 0; /* battery disconnected */ - else - val->intval = 1; /* battery present */ - } else { /* POWER_SUPPLY_PROP_HEALTH */ + /* Dummy command; if it succeeds, battery is present. */ + ret = sbs_read_word_data(client, sbs_data[REG_STATUS].addr); + + if (ret < 0) { /* battery not present*/ + if (psp == POWER_SUPPLY_PROP_PRESENT) { + val->intval = 0; + return 0; + } + return ret; + } + + if (psp == POWER_SUPPLY_PROP_PRESENT) + val->intval = 1; /* battery present */ + else /* POWER_SUPPLY_PROP_HEALTH */ /* SBS spec doesn't have a general health command. */ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN; - }
return 0; } @@ -626,6 +631,8 @@ static int sbs_get_property(struct power_supply *psy, else ret = sbs_get_battery_presence_and_health(client, psp, val); + + /* this can only be true if no gpio is used */ if (psp == POWER_SUPPLY_PROP_PRESENT) return 0; break;