From: "Andrew F. Davis" afd@ti.com
[ Upstream commit dcb407b257af06fa58b0544ec01ec9e0d3927e02 ]
Currently BCLK inverting is only handled when the DAI format is DSP, but the BCLK may be inverted in any supported mode. Without this using this CODEC in any other mode than DSP with the BCLK inverted leads to bad sampling timing and very poor audio quality.
Signed-off-by: Andrew F. Davis afd@ti.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin alexander.levin@microsoft.com --- sound/soc/codecs/tlv320aic31xx.c | 28 ++++++++++++++++++---------- 1 file changed, 18 insertions(+), 10 deletions(-)
diff --git a/sound/soc/codecs/tlv320aic31xx.c b/sound/soc/codecs/tlv320aic31xx.c index 93de5dd0a7b9..fbeb34e87032 100644 --- a/sound/soc/codecs/tlv320aic31xx.c +++ b/sound/soc/codecs/tlv320aic31xx.c @@ -845,6 +845,18 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai, return -EINVAL; }
+ /* signal polarity */ + switch (fmt & SND_SOC_DAIFMT_INV_MASK) { + case SND_SOC_DAIFMT_NB_NF: + break; + case SND_SOC_DAIFMT_IB_NF: + iface_reg2 |= AIC31XX_BCLKINV_MASK; + break; + default: + dev_err(codec->dev, "Invalid DAI clock signal polarity\n"); + return -EINVAL; + } + /* interface format */ switch (fmt & SND_SOC_DAIFMT_FORMAT_MASK) { case SND_SOC_DAIFMT_I2S: @@ -852,16 +864,12 @@ static int aic31xx_set_dai_fmt(struct snd_soc_dai *codec_dai, case SND_SOC_DAIFMT_DSP_A: dsp_a_val = 0x1; case SND_SOC_DAIFMT_DSP_B: - /* NOTE: BCLKINV bit value 1 equas NB and 0 equals IB */ - switch (fmt & SND_SOC_DAIFMT_INV_MASK) { - case SND_SOC_DAIFMT_NB_NF: - iface_reg2 |= AIC31XX_BCLKINV_MASK; - break; - case SND_SOC_DAIFMT_IB_NF: - break; - default: - return -EINVAL; - } + /* + * NOTE: This CODEC samples on the falling edge of BCLK in + * DSP mode, this is inverted compared to what most DAIs + * expect, so we invert for this mode + */ + iface_reg2 ^= AIC31XX_BCLKINV_MASK; iface_reg1 |= (AIC31XX_DSP_MODE << AIC31XX_IFACE1_DATATYPE_SHIFT); break;