From: Johan Hovold johan@kernel.org
commit 8e83622ae7ca481c76c8fd9579877f6abae64ca2 upstream.
Disable LCR updates for pre-0x30 devices which use a different (unknown) protocol for line control and where the current register write causes the next received character to be lost.
Note that updating LCR using the INIT command has no effect on these devices either.
Reported-by: Jonathan Woithe jwoithe@just42.net Tested-by: Jonathan Woithe jwoithe@just42.net Link: https://lore.kernel.org/r/Ys1iPTfiZRWj2gXs@marvin.atrad.com.au Fixes: 4e46c410e050 ("USB: serial: ch341: reinitialize chip on reconfiguration") Fixes: 55fa15b5987d ("USB: serial: ch341: fix baud rate and line-control handling") Cc: stable@vger.kernel.org # 4.10 Signed-off-by: Johan Hovold johan@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/usb/serial/ch341.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)
--- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -97,7 +97,10 @@ struct ch341_private { u8 mcr; u8 msr; u8 lcr; + unsigned long quirks; + u8 version; + unsigned long break_end; };
@@ -265,6 +268,9 @@ static int ch341_set_baudrate_lcr(struct * (stop bits, parity and word length). Version 0x30 and above use * CH341_REG_LCR only and CH341_REG_LCR2 is always set to zero. */ + if (priv->version < 0x30) + return 0; + r = ch341_control_out(dev, CH341_REQ_WRITE_REG, CH341_REG_LCR2 << 8 | CH341_REG_LCR, lcr); if (r) @@ -308,7 +314,9 @@ static int ch341_configure(struct usb_de r = ch341_control_in(dev, CH341_REQ_READ_VERSION, 0, 0, buffer, size); if (r) return r; - dev_dbg(&dev->dev, "Chip version: 0x%02x\n", buffer[0]); + + priv->version = buffer[0]; + dev_dbg(&dev->dev, "Chip version: 0x%02x\n", priv->version);
r = ch341_control_out(dev, CH341_REQ_SERIAL_INIT, 0, 0); if (r < 0)