From: Geoff Levand geoff@infradead.org
[ Upstream commit 19b3bb51c3bc288b3f2c6f8c4450b0f548320625 ]
The Gelic Ethernet device needs to have the RX sk_buffs aligned to GELIC_NET_RXBUF_ALIGN, and also the length of the RX sk_buffs must be a multiple of GELIC_NET_RXBUF_ALIGN.
The current Gelic Ethernet driver was not allocating sk_buffs large enough to allow for this alignment.
Also, correct the maximum and minimum MTU sizes, and add a new preprocessor macro for the maximum frame size, GELIC_NET_MAX_FRAME.
Fixes various randomly occurring runtime network errors.
Fixes: 02c1889166b4 ("ps3: gigabit ethernet driver for PS3, take3") Signed-off-by: Geoff Levand geoff@infradead.org Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/toshiba/ps3_gelic_net.c | 19 ++++++++++--------- drivers/net/ethernet/toshiba/ps3_gelic_net.h | 5 +++-- 2 files changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.c b/drivers/net/ethernet/toshiba/ps3_gelic_net.c index d9a5722f561b5..013011285dd01 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.c +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.c @@ -365,26 +365,27 @@ static int gelic_card_init_chain(struct gelic_card *card, * * allocates a new rx skb, iommu-maps it and attaches it to the descriptor. * Activate the descriptor state-wise + * + * Gelic RX sk_buffs must be aligned to GELIC_NET_RXBUF_ALIGN and the length + * must be a multiple of GELIC_NET_RXBUF_ALIGN. */ static int gelic_descr_prepare_rx(struct gelic_card *card, struct gelic_descr *descr) { + static const unsigned int rx_skb_size = + ALIGN(GELIC_NET_MAX_FRAME, GELIC_NET_RXBUF_ALIGN) + + GELIC_NET_RXBUF_ALIGN - 1; int offset; - unsigned int bufsize;
if (gelic_descr_get_status(descr) != GELIC_DESCR_DMA_NOT_IN_USE) dev_info(ctodev(card), "%s: ERROR status\n", __func__); - /* we need to round up the buffer size to a multiple of 128 */ - bufsize = ALIGN(GELIC_NET_MAX_MTU, GELIC_NET_RXBUF_ALIGN);
- /* and we need to have it 128 byte aligned, therefore we allocate a - * bit more */ - descr->skb = dev_alloc_skb(bufsize + GELIC_NET_RXBUF_ALIGN - 1); + descr->skb = netdev_alloc_skb(*card->netdev, rx_skb_size); if (!descr->skb) { descr->buf_addr = 0; /* tell DMAC don't touch memory */ return -ENOMEM; } - descr->buf_size = cpu_to_be32(bufsize); + descr->buf_size = cpu_to_be32(rx_skb_size); descr->dmac_cmd_status = 0; descr->result_size = 0; descr->valid_size = 0; @@ -397,7 +398,7 @@ static int gelic_descr_prepare_rx(struct gelic_card *card, /* io-mmu-map the skb */ descr->buf_addr = cpu_to_be32(dma_map_single(ctodev(card), descr->skb->data, - GELIC_NET_MAX_MTU, + GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE)); if (!descr->buf_addr) { dev_kfree_skb_any(descr->skb); @@ -915,7 +916,7 @@ static void gelic_net_pass_skb_up(struct gelic_descr *descr, data_error = be32_to_cpu(descr->data_error); /* unmap skb buffer */ dma_unmap_single(ctodev(card), be32_to_cpu(descr->buf_addr), - GELIC_NET_MAX_MTU, + GELIC_NET_MAX_FRAME, DMA_FROM_DEVICE);
skb_put(skb, be32_to_cpu(descr->valid_size)? diff --git a/drivers/net/ethernet/toshiba/ps3_gelic_net.h b/drivers/net/ethernet/toshiba/ps3_gelic_net.h index 68f324ed4eaf0..0d98defb011ed 100644 --- a/drivers/net/ethernet/toshiba/ps3_gelic_net.h +++ b/drivers/net/ethernet/toshiba/ps3_gelic_net.h @@ -19,8 +19,9 @@ #define GELIC_NET_RX_DESCRIPTORS 128 /* num of descriptors */ #define GELIC_NET_TX_DESCRIPTORS 128 /* num of descriptors */
-#define GELIC_NET_MAX_MTU VLAN_ETH_FRAME_LEN -#define GELIC_NET_MIN_MTU VLAN_ETH_ZLEN +#define GELIC_NET_MAX_FRAME 2312 +#define GELIC_NET_MAX_MTU 2294 +#define GELIC_NET_MIN_MTU 64 #define GELIC_NET_RXBUF_ALIGN 128 #define GELIC_CARD_RX_CSUM_DEFAULT 1 /* hw chksum */ #define GELIC_NET_WATCHDOG_TIMEOUT 5*HZ