This is the first part in upstreaming a set of around 100 patches that were developed in NXP's vendor Linux Factory kernel over the course of several years.
This part is mainly concerned with correcting some historical mistakes which make extending the driver more difficult: - The 3 instances of this SerDes block, as seen on NXP LX2160A, need to be differentiated somehow, because otherwise, the driver cannot reject a configuration which is unsupported by the hardware. The proposal is to do that based on compatible string. - Lanes cannot have electrical parameters described in the device tree, because they are not described in the device tree. - The register naming scheme forces us to modify a single register field per lynx_28g_lane_rmw() call - leads to inefficient code - lynx_28g_lane_set_sgmii(), lynx_28g_lane_set_10gbaser() are unfit for their required roles when the current SerDes protocol is 25GBase-R. They are replaced with a better structured approach. - USXGMII and 10GBase-R have different protocol converters, and should be treated separately by the SerDes driver.
The device tree binding + driver changes are all non-breaking. I also have device tree conversions for LX2160A and LX2162A which are also non-breaking due to their partial nature.
If I were to replace patterns such as: phys = <&serdes_2 0>; with: phys = <&serdes_2_lane_a>;
then the corresponding device tree conversions would also be breaking. I don't _need_ to do that to make progress, but eventually I would like to be able to.
In order to be able to make that kind of change in a non-breaking manner in a reasonable number of years, I would like patches 1-3 to be backported to stable kernels.
Compared to v3 here: https://lore.kernel.org/linux-phy/20250926180505.760089-1-vladimir.oltean@nx... there are some new patches, but it overall shrank in size because I deferred new features to "part 2". Essentially, v4 is like v3, except with a better plan to handle device tree transitions without breakage, and with the following patches temporarily dropped: [PATCH v3 phy 14/17] phy: lynx-28g: add support for 25GBASER [PATCH v3 phy 15/17] phy: lynx-28g: use timeouts when waiting for lane halt and reset [PATCH v3 phy 16/17] phy: lynx-28g: truly power the lanes up or down [PATCH v3 phy 17/17] phy: lynx-28g: implement phy_exit() operation
Compared to v2 here: https://lore.kernel.org/lkml/d0c8bbf8-a0c5-469f-a148-de2235948c0f@solid-run.... v3 grew in size due to Josua's request to avoid unbounded loops waiting for lane resets/halts/stops to complete.
Compared to v1 here: https://lore.kernel.org/lkml/20250904154402.300032-1-vladimir.oltean@nxp.com... v2 grew in size due to Josua's request for a device tree binding where individual lanes have their own OF nodes. This seems to be the right moment to make that change.
Detailed change log in individual patches. Thanks to Josua, Rob, Conor, Krzysztof, Ioana who provided feedback on the previous version, and I hope it has all been addressed.
Cc: Rob Herring robh@kernel.org Cc: Krzysztof Kozlowski krzk+dt@kernel.org Cc: Conor Dooley conor+dt@kernel.org Cc: devicetree@vger.kernel.org Cc: stable@vger.kernel.org
Ioana Ciornei (1): phy: lynx-28g: configure more equalization params for 1GbE and 10GbE
Vladimir Oltean (15): dt-bindings: phy: lynx-28g: permit lane OF PHY providers phy: lynx-28g: refactor lane probing to lynx_28g_probe_lane() phy: lynx-28g: support individual lanes as OF PHY providers phy: lynx-28g: remove LYNX_28G_ prefix from register names phy: lynx-28g: don't concatenate lynx_28g_lane_rmw() argument "reg" with "val" and "mask" phy: lynx-28g: use FIELD_GET() and FIELD_PREP() phy: lynx-28g: convert iowrite32() calls with magic values to macros phy: lynx-28g: restructure protocol configuration register accesses phy: lynx-28g: make lynx_28g_set_lane_mode() more systematic phy: lynx-28g: refactor lane->interface to lane->mode phy: lynx-28g: distinguish between 10GBASE-R and USXGMII phy: lynx-28g: use "dev" argument more in lynx_28g_probe() phy: lynx-28g: improve lynx_28g_probe() sequence dt-bindings: phy: lynx-28g: add compatible strings per SerDes and instantiation phy: lynx-28g: probe on per-SoC and per-instance compatible strings
.../devicetree/bindings/phy/fsl,lynx-28g.yaml | 153 +- drivers/phy/freescale/phy-fsl-lynx-28g.c | 1271 +++++++++++++---- 2 files changed, 1134 insertions(+), 290 deletions(-)