From: Sergej Benilov sergej.benilov@googlemail.com
[ Upstream commit 8ac8a01092b2added0749ef937037bf1912e13e3 ]
Since commit 605ad7f184b60cfaacbc038aa6c55ee68dee3c89 "tcp: refine TSO autosizing", outbound throughput is dramatically reduced for some connections, as sis900 is doing TX completion within idle states only.
Make TX completion happen after every transmitted packet.
Test: netperf
before patch:
netperf -H remote -l -2000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 253.44 0.06
after patch:
netperf -H remote -l -10000000 -- -s 1000000
MIGRATED TCP STREAM TEST from 0.0.0.0 () port 0 AF_INET to 95.223.112.76 () port 0 AF_INET : demo Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec
87380 327680 327680 5.38 14.89
Thx to Dave Miller and Eric Dumazet for helpful hints
Signed-off-by: Sergej Benilov sergej.benilov@googlemail.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/ethernet/sis/sis900.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/sis/sis900.c b/drivers/net/ethernet/sis/sis900.c index 4bb89f74742c..d5bcbc40a55f 100644 --- a/drivers/net/ethernet/sis/sis900.c +++ b/drivers/net/ethernet/sis/sis900.c @@ -1057,7 +1057,7 @@ sis900_open(struct net_device *net_dev) sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */ - sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC); sw32(cr, RxENA | sr32(cr)); sw32(ier, IE);
@@ -1578,7 +1578,7 @@ static void sis900_tx_timeout(struct net_device *net_dev) sw32(txdp, sis_priv->tx_ring_dma);
/* Enable all known interrupts by setting the interrupt mask. */ - sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC); }
/** @@ -1618,7 +1618,7 @@ sis900_start_xmit(struct sk_buff *skb, struct net_device *net_dev) spin_unlock_irqrestore(&sis_priv->lock, flags); return NETDEV_TX_OK; } - sis_priv->tx_ring[entry].cmdsts = (OWN | skb->len); + sis_priv->tx_ring[entry].cmdsts = (OWN | INTR | skb->len); sw32(cr, TxENA | sr32(cr));
sis_priv->cur_tx ++; @@ -1674,7 +1674,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance) do { status = sr32(isr);
- if ((status & (HIBERR|TxURN|TxERR|TxIDLE|RxORN|RxERR|RxOK)) == 0) + if ((status & (HIBERR|TxURN|TxERR|TxIDLE|TxDESC|RxORN|RxERR|RxOK)) == 0) /* nothing intresting happened */ break; handled = 1; @@ -1684,7 +1684,7 @@ static irqreturn_t sis900_interrupt(int irq, void *dev_instance) /* Rx interrupt */ sis900_rx(net_dev);
- if (status & (TxURN | TxERR | TxIDLE)) + if (status & (TxURN | TxERR | TxIDLE | TxDESC)) /* Tx interrupt */ sis900_finish_xmit(net_dev);
@@ -1896,8 +1896,8 @@ static void sis900_finish_xmit (struct net_device *net_dev)
if (tx_status & OWN) { /* The packet is not transmitted yet (owned by hardware) ! - * Note: the interrupt is generated only when Tx Machine - * is idle, so this is an almost impossible case */ + * Note: this is an almost impossible condition + * in case of TxDESC ('descriptor interrupt') */ break; }
@@ -2473,7 +2473,7 @@ static int sis900_resume(struct pci_dev *pci_dev) sis900_set_mode(sis_priv, HW_SPEED_10_MBPS, FDX_CAPABLE_HALF_SELECTED);
/* Enable all known interrupts by setting the interrupt mask. */ - sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE); + sw32(imr, RxSOVR | RxORN | RxERR | RxOK | TxURN | TxERR | TxIDLE | TxDESC); sw32(cr, RxENA | sr32(cr)); sw32(ier, IE);