From: Rob Herring robh@kernel.org
[ Upstream commit 2f967f9e9fa076affb711da1a8389b5d33814fc6 ]
SPI controller nodes should be named 'spi' rather than 'ssp'. Fixing the name enables dtc SPI bus checks.
Signed-off-by: Rob Herring robh@kernel.org Signed-off-by: Linus Walleij linus.walleij@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/ste-dbx5x0.dtsi | 4 ++-- arch/arm/boot/dts/ste-hrefprev60.dtsi | 2 +- arch/arm/boot/dts/ste-snowball.dts | 2 +- arch/arm/boot/dts/ste-u300.dts | 2 +- 4 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 45869c3234358..5f1769209526a 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -864,7 +864,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; };
- ssp@80002000 { + spi@80002000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80002000 0x1000>; interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; @@ -878,7 +878,7 @@ power-domains = <&pm_domains DOMAIN_VAPE>; };
- ssp@80003000 { + spi@80003000 { compatible = "arm,pl022", "arm,primecell"; reg = <0x80003000 0x1000>; interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index ece222d51717c..cf8d03bc42c15 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -57,7 +57,7 @@ }; };
- ssp@80002000 { + spi@80002000 { /* * On the first generation boards, this SSP/SPI port was connected * to the AB8500. diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index 386eee6de2320..272d36c3d223b 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -386,7 +386,7 @@ pinctrl-1 = <&i2c3_sleep_mode>; };
- ssp@80002000 { + spi@80002000 { pinctrl-names = "default"; pinctrl-0 = <&ssp0_snowball_mode>; }; diff --git a/arch/arm/boot/dts/ste-u300.dts b/arch/arm/boot/dts/ste-u300.dts index 2f5107ffeef04..ea6768b96a9df 100644 --- a/arch/arm/boot/dts/ste-u300.dts +++ b/arch/arm/boot/dts/ste-u300.dts @@ -441,7 +441,7 @@ dma-names = "rx"; };
- spi: ssp@c0006000 { + spi: spi@c0006000 { compatible = "arm,pl022", "arm,primecell"; reg = <0xc0006000 0x1000>; interrupt-parent = <&vica>;