Hi,
On 30-10-18 16:04, Pierre-Louis Bossart wrote:
On 10/30/18 9:38 AM, Dean Wallace wrote:
On 30-10-18, Hans de Goede wrote:
Hi Dean,
Attached are 2 different attempts at fixing this.
When trying these patches do not forget to remove the revert of the "Stop-marking-clocks-as-CLK_IS_CRITICAL" commit.
Please first try the 0001-ASoC-intel-cht_bsw_max98090_ti-Use-pmc_plt_clk_0-ins.patch patch I expect that one to do the trick indicating that the Swanky model uses a different pmc clk then which is normally used for the codec clock.
If that patch does not fix things, please give the other patch a try.
For Baytrail devices, the audio platform clocks are not managed by the firmware. They are for CHT-based devices - as can be seen by clock resources being described in the DSDT. We used to have a if(baytrail) in the code which was replaced by this CRITICAL label, but the point remains that there is a difference between the two SOC versions.
As I mentioned before the CRITICAL flag was only added a year ago to workaround an issue with on board ethernet needing plt_clk_4 on some laptops, this never had anything to do with sound.
In addition I am not aware of any baytrail device using plt_clk_0, so moving a common machine driver such a cht_bsw_max98090_ti to use plt_clk0 only would break other devices (e.g. Rambi/Orco). Asking for both clocks to be on might work though,
Ok, so we need to have a DMI based quirk for the Swanky and maybe also the clapper to use plt_clk_0 there. Asking for 2 clks if we only need one does not seem like a good plan.
however you still have the problem of trying to manage from the kernel what the firmware already manages.
The firmware only manages it when going to D3 state, with ASoC most of the codecs gets turned off (and we no longer need the clock) but we do not put the device in D3 / execute the _PS3 method. So from a pm pov it is better if we manage the clk ourselves.
Once we do actually put the device in D3 (on suspend) the kernel will have already turned off the clk and the _OFF method of the CLK3 power resource which directly pokes mmio, will just set the enable bit to 0 when it already is 0, so no problem.
Regards,
Hans
Regards,
Hans
On 29-10-18 23:03, Pierre-Louis Bossart wrote:
On 10/29/18 2:08 PM, Dean Wallace wrote:
On 29-10-18, Andy Shevchenko wrote:
On Mon, Oct 29, 2018 at 7:52 PM Andy Shevchenko andy.shevchenko@gmail.com wrote: > Cc: Pierre as well. > > On Mon, Oct 29, 2018 at 7:48 PM Stephen Boyd sboyd@kernel.org wrote: >> Quoting Dean Wallace (2018-10-25 16:25:17) >>> I have found a regression in 4.18.15 that means I lose sound on my old >>> Toshiba Chromebook 2 (Swanky). My system details are:- >>> >>> Toshiba Chromebook (Swanky) >>> MrChromebox UEFI coreboot >>> Arch Linux running latest alsa/pulseaudio >>> >>> Upgraded kernel from 4.18.14 to 4.18.15 and lost all sound output. By >>> output I mean, the card is still detected, the module loaded, all apps >>> showing sound is being playing, but no actual audible sound comes >>> through. Upgraded to 4.18.16 same issue. >>> >>> Dug around and found Upstream commit 648e921888ad96ea3dc922739e96716ad3225d7f >>> clk: x86: Stop marking clocks as CLK_IS_CRITICAL >>> "This commit removes the CLK_IS_CRITICAL marking, fixing Cherry Trail >>> devices not being able to reach S0i3 greatly decreasing their battery >>> drain when suspended." >>> >>> I reverted it and compiled 4.18.16 and have sound back again. Could >>> this be looked into, with possibility of fix. >>> >> Thanks for the bug report. I'm adding some people involved in the commit >> you mention is causing audio regressions. The best plan is to probably >> revert the commit from the 4.18 linux stable tree. Or there may be >> another patch missing that would be useful to make this backported patch >> work. Hopefully Hans or Andy knows. > Hans has been investigating S0ix issues on Baytrail and Cherrytrail machines. > I have a feeling that the problem can be fixed by properly handling > clock in ASoC driver(s). Perhaps Hans and Pierre can figure this out > better than me. Looking to sound/soc/intel/boards/cht_bsw_rt5672.c I see no suspend-resume hooks. Perhaps, adding them like in the commit ac8bd9e13be2 ("r8169: Disable clk during suspend / resume") would help.
I missed this change while i was away. It's indeed the expectation that the audio mclk is handled by the firmware,
I believe that the statement "It's indeed the expectation that the audio mclk is handled by the firmware" is not correct for BYT/CHT platforms (and the commit causing the regression only affects BYT/CHT platforms). Various machine drivers under sound/soc/intel/boards have code to deal with the mclk themselves, like this:
drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); ...
if (SND_SOC_DAPM_EVENT_ON(event)) { ret = clk_prepare_enable(ctx->mclk); ... } else { clk_disable_unprepare(ctx->mclk); }
The above code is from sound/soc/intel/boards/cht_bsw_max98090_ti.c which is the machine driver used on the machines for which problems are now being reported.
And my commit introducing the problem is in essence a revert of:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id...
Which is from 2017-07-14 and the ASoC code for BYT/CHT platforms is much older then that.
Also I asked Carlo why he wrote that patch and it was to fix a problem with ethernet on some laptops.
not sure I understand why removing the CLK_IS_CRITICAL was necessary or what it has to do with S0ix.
It is necessary, because if it is set the clock never gets disabled and on x86 platforms using suspend2idle we are responsible for *all* the hardware power-management as OS. If we do not disable the clocks then we can only reach S0i1 instead of S0i3 when suspended leading to increased battery drain during suspend.
Also note that this patch is only causing problems on CHT + max98090 codec using machines. I've tested it on many other BYT/CHT machines myself and we've not had any other bug reports related to this.
So this clearly points to a problem with the clock management in the cht_bsw_max98090_ti.c machine driver.
I've some ideas how to fix this and I will prepare some patches to test.
Regards,
Hans
Excellent work Hans. Compiled 4.19 with 0001-ASoC-intel-cht_bsw_max98090_ti-Use-pmc_plt_clk_0-ins.patch, sound works as before.
for i in /sys/kernel/debug/clk/pmc_plt_clk_?; do echo -n "$i: "; cat $i/clk_flags; echo; done /sys/kernel/debug/clk/pmc_plt_clk_0: /sys/kernel/debug/clk/pmc_plt_clk_1: /sys/kernel/debug/clk/pmc_plt_clk_2: /sys/kernel/debug/clk/pmc_plt_clk_3: /sys/kernel/debug/clk/pmc_plt_clk_4: /sys/kernel/debug/clk/pmc_plt_clk_5:
Regards