From: Max Chou max.chou@realtek.com
[ Upstream commit 7948fe1c92d92313eea5453f83deb7f0141355e8 ]
Add the support for RTL8851B BT controller on USB interface. The necessary firmware will be submitted to linux-firmware project.
Note that the Bluetooth devices WITH the VID=0x0bda would be set the feature quirk in btrtl_setup_realtek(). It's able to ignore the feature flag set for the specific VID and PID in blacklist_table[] of btusb.c. (check [1])
If Realtek Bluetooth chips WITHOUT the VID=0x0bda, it shall be added the feature flag for the specific VID and PID in blacklist_table[] of btusb.c. (check [2])
[1] '9ab9235fe5cf ("Bluetooth: btrtl: Enable WBS for the specific Realtek devices")' [2] '73280f13c9bb ("Bluetooth: btusb: Add the more support IDs for Realtek RTL8822CE")'
The device info from /sys/kernel/debug/usb/devices as below.
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 33 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0bda ProdID=b851 Rev= 0.00 S: Manufacturer=Realtek S: Product=802.11ax WLAN Adapter S: SerialNumber=00E04C885A01 C:* #Ifs= 3 Cfg#= 1 Atr=80 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=01 I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms I:* If#= 2 Alt= 0 #EPs= 8 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
Signed-off-by: Max Chou max.chou@realtek.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/bluetooth/btrtl.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index 88f8c604d70a2..ead632595ce06 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -28,6 +28,7 @@ #define RTL_ROM_LMP_8761A 0x8761 #define RTL_ROM_LMP_8822B 0x8822 #define RTL_ROM_LMP_8852A 0x8852 +#define RTL_ROM_LMP_8851B 0x8851 #define RTL_CONFIG_MAGIC 0x8723ab55
#define IC_MATCH_FL_LMPSUBV (1 << 0) @@ -56,6 +57,7 @@ enum btrtl_chip_id { CHIP_ID_8852A = 18, CHIP_ID_8852B = 20, CHIP_ID_8852C = 25, + CHIP_ID_8851B = 36, };
struct id_table { @@ -244,6 +246,14 @@ static const struct id_table ic_id_table[] = { .has_msft_ext = true, .fw_name = "rtl_bt/rtl8852cu_fw.bin", .cfg_name = "rtl_bt/rtl8852cu_config" }, + + /* 8851B */ + { IC_INFO(RTL_ROM_LMP_8851B, 0xb, 0xc, HCI_USB), + .config_needed = false, + .has_rom_version = true, + .has_msft_ext = false, + .fw_name = "rtl_bt/rtl8851bu_fw.bin", + .cfg_name = "rtl_bt/rtl8851bu_config" }, };
static const struct id_table *btrtl_match_ic(u16 lmp_subver, u16 hci_rev, @@ -359,6 +369,7 @@ static int rtlbt_parse_firmware(struct hci_dev *hdev, { RTL_ROM_LMP_8852A, 18 }, /* 8852A */ { RTL_ROM_LMP_8852A, 20 }, /* 8852B */ { RTL_ROM_LMP_8852A, 25 }, /* 8852C */ + { RTL_ROM_LMP_8851B, 36 }, /* 8851B */ };
min_size = sizeof(struct rtl_epatch_header) + sizeof(extension_sig) + 3; @@ -848,6 +859,7 @@ int btrtl_download_firmware(struct hci_dev *hdev, case RTL_ROM_LMP_8822B: case RTL_ROM_LMP_8852A: case RTL_ROM_LMP_8703B: + case RTL_ROM_LMP_8851B: return btrtl_setup_rtl8723b(hdev, btrtl_dev); default: rtl_dev_info(hdev, "assuming no firmware upload needed"); @@ -872,6 +884,7 @@ void btrtl_set_quirks(struct hci_dev *hdev, struct btrtl_device_info *btrtl_dev) case CHIP_ID_8852A: case CHIP_ID_8852B: case CHIP_ID_8852C: + case CHIP_ID_8851B: set_bit(HCI_QUIRK_VALID_LE_STATES, &hdev->quirks); set_bit(HCI_QUIRK_WIDEBAND_SPEECH_SUPPORTED, &hdev->quirks); hci_set_aosp_capable(hdev); @@ -1075,3 +1088,5 @@ MODULE_FIRMWARE("rtl_bt/rtl8852bu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852bu_config.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_fw.bin"); MODULE_FIRMWARE("rtl_bt/rtl8852cu_config.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8851bu_fw.bin"); +MODULE_FIRMWARE("rtl_bt/rtl8851bu_config.bin");