The ast HW cursor requires the primary plane and CRTC to display at a valid mode and format. This is not the case while switching display modes, which can lead to the screen turing permanently dark.
As a workaround, the ast driver now disables active planes while the mode or format switch takes place. It also synchronizes with the vertical refresh to give CRTC and planes some time to catch up on each other. The active planes planes (primary or cursor) will be re-enabled by each plane's atomic_update() function.
v2: * move the logic into the commit-tail function
Signed-off-by: Thomas Zimmermann tzimmermann@suse.de Fixes: 4961eb60f145 ("drm/ast: Enable atomic modesetting") Cc: Thomas Zimmermann tzimmermann@suse.de Cc: Gerd Hoffmann kraxel@redhat.com Cc: Dave Airlie airlied@redhat.com Cc: Daniel Vetter daniel.vetter@ffwll.ch Cc: Sam Ravnborg sam@ravnborg.org Cc: Emil Velikov emil.l.velikov@gmail.com Cc: "Y.C. Chen" yc_chen@aspeedtech.com Cc: stable@vger.kernel.org # v5.6+ --- drivers/gpu/drm/ast/ast_drv.h | 2 + drivers/gpu/drm/ast/ast_mode.c | 68 ++++++++++++++++++++++++++++++++-- 2 files changed, 66 insertions(+), 4 deletions(-)
diff --git a/drivers/gpu/drm/ast/ast_drv.h b/drivers/gpu/drm/ast/ast_drv.h index c1af6b725933..467049ca8430 100644 --- a/drivers/gpu/drm/ast/ast_drv.h +++ b/drivers/gpu/drm/ast/ast_drv.h @@ -177,6 +177,8 @@ struct ast_private *ast_device_create(struct drm_driver *drv,
#define AST_IO_MM_OFFSET (0x380)
+#define AST_IO_VGAIR1_VREFRESH BIT(3) + #define __ast_read(x) \ static inline u##x ast_read##x(struct ast_private *ast, u32 reg) { \ u##x val = 0;\ diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index ae5cb0a333f7..a379d51f3543 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -514,6 +514,17 @@ static void ast_set_start_address_crt1(struct ast_private *ast,
}
+static void ast_wait_for_vretrace(struct ast_private *ast) +{ + unsigned long timeout = jiffies + HZ; + u8 vgair1; + + do { + vgair1 = ast_io_read8(ast, AST_IO_INPUT_STATUS1_READ); + } while (!(vgair1 & AST_IO_VGAIR1_VREFRESH) && + time_before(jiffies, timeout)); +} + /* * Primary plane */ @@ -1043,23 +1054,72 @@ static int ast_connector_init(struct drm_device *dev) * Mode config */
+static bool +ast_crtc_needs_planes_disabled(struct drm_crtc_state *old_crtc_state, + struct drm_crtc_state *new_crtc_state) +{ + struct ast_crtc_state *old_ast_crtc_state, *new_ast_crtc_state; + + if (drm_atomic_crtc_needs_modeset(new_crtc_state)) + return true; + + old_ast_crtc_state = to_ast_crtc_state(old_crtc_state); + new_ast_crtc_state = to_ast_crtc_state(new_crtc_state); + + if (old_ast_crtc_state->format != new_ast_crtc_state->format) + return true; + + return false; +} + static void ast_mode_config_helper_commit_tail(struct drm_atomic_state *old_state) { struct drm_device *dev = old_state->dev; + struct ast_private *ast = to_ast_private(dev); + struct drm_crtc_state *old_crtc_state, *new_crtc_state; + struct drm_crtc *crtc; + int i; + bool wait_for_vretrace = false;
drm_atomic_helper_commit_modeset_disables(dev, old_state);
- drm_atomic_helper_commit_planes(dev, old_state, 0); + /* + * HW cursors require the underlying primary plane and CRTC to + * display a valid mode and image. This is not the case during + * full modeset operations. So we temporarily disable any active + * plane, including the HW cursor. Each plane's atomic_update() + * helper will re-enable it if necessary. + * + * We only do this during *full* modesets. It does not affect + * simple pageflips on the planes. + */ + for_each_oldnew_crtc_in_state(old_state, crtc, + old_crtc_state, + new_crtc_state, i) { + if (!ast_crtc_needs_planes_disabled(old_crtc_state, + new_crtc_state)) + continue; + drm_atomic_helper_disable_planes_on_crtc(old_crtc_state, + false); + wait_for_vretrace = true; + } + + /* + * Ensure that no scanout takes place before reprogramming mode + * and format registers. + */ + if (wait_for_vretrace) + ast_wait_for_vretrace(ast); + + drm_atomic_helper_commit_planes(dev, old_state, + DRM_PLANE_COMMIT_ACTIVE_ONLY);
drm_atomic_helper_commit_modeset_enables(dev, old_state);
drm_atomic_helper_fake_vblank(old_state); - drm_atomic_helper_commit_hw_done(old_state); - drm_atomic_helper_wait_for_vblanks(dev, old_state); - drm_atomic_helper_cleanup_planes(dev, old_state); }