From: Oliver O'Halloran oohall@gmail.com
[ Upstream commit 1f8fa0cd6a848ff072bffe0ee776554387128f60 ]
Fold pseries_eeh_init() into eeh_pseries_init() rather than having eeh_init() call it via eeh_ops->init(). It's simpler and it'll let us delete eeh_ops.init.
Signed-off-by: Oliver O'Halloran oohall@gmail.com Signed-off-by: Michael Ellerman mpe@ellerman.id.au Link: https://lore.kernel.org/r/20200918093050.37344-3-oohall@gmail.com Stable-dep-of: 9aafbfa5f57a ("powerpc/pseries/eeh: use correct API for error log size") Signed-off-by: Sasha Levin sashal@kernel.org --- arch/powerpc/platforms/pseries/eeh_pseries.c | 155 +++++++++---------- 1 file changed, 71 insertions(+), 84 deletions(-)
diff --git a/arch/powerpc/platforms/pseries/eeh_pseries.c b/arch/powerpc/platforms/pseries/eeh_pseries.c index 560d7401496c..7a0b9aa09d10 100644 --- a/arch/powerpc/platforms/pseries/eeh_pseries.c +++ b/arch/powerpc/platforms/pseries/eeh_pseries.c @@ -250,88 +250,6 @@ static unsigned char slot_errbuf[RTAS_ERROR_LOG_MAX]; static DEFINE_SPINLOCK(slot_errbuf_lock); static int eeh_error_buf_size;
-/** - * pseries_eeh_init - EEH platform dependent initialization - * - * EEH platform dependent initialization on pseries. - */ -static int pseries_eeh_init(void) -{ - struct pci_controller *phb; - struct pci_dn *pdn; - int addr, config_addr; - - /* figure out EEH RTAS function call tokens */ - ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); - ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); - ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); - ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); - ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); - ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); - ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); - ibm_configure_pe = rtas_token("ibm,configure-pe"); - - /* - * ibm,configure-pe and ibm,configure-bridge have the same semantics, - * however ibm,configure-pe can be faster. If we can't find - * ibm,configure-pe then fall back to using ibm,configure-bridge. - */ - if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE) - ibm_configure_pe = rtas_token("ibm,configure-bridge"); - - /* - * Necessary sanity check. We needn't check "get-config-addr-info" - * and its variant since the old firmware probably support address - * of domain/bus/slot/function for EEH RTAS operations. - */ - if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE || - ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE || - (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && - ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) || - ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE || - ibm_configure_pe == RTAS_UNKNOWN_SERVICE) { - pr_info("EEH functionality not supported\n"); - return -EINVAL; - } - - /* Initialize error log lock and size */ - spin_lock_init(&slot_errbuf_lock); - eeh_error_buf_size = rtas_token("rtas-error-log-max"); - if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { - pr_info("%s: unknown EEH error log size\n", - __func__); - eeh_error_buf_size = 1024; - } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { - pr_info("%s: EEH error log size %d exceeds the maximal %d\n", - __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX); - eeh_error_buf_size = RTAS_ERROR_LOG_MAX; - } - - /* Set EEH probe mode */ - eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG); - - /* Set EEH machine dependent code */ - ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device; - - if (is_kdump_kernel() || reset_devices) { - pr_info("Issue PHB reset ...\n"); - list_for_each_entry(phb, &hose_list, list_node) { - pdn = list_first_entry(&PCI_DN(phb->dn)->child_list, struct pci_dn, list); - addr = (pdn->busno << 16) | (pdn->devfn << 8); - config_addr = pseries_eeh_get_config_addr(phb, addr); - /* invalid PE config addr */ - if (config_addr == 0) - continue; - - pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_FUNDAMENTAL); - pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_DEACTIVATE); - pseries_eeh_phb_configure_bridge(phb, config_addr); - } - } - - return 0; -} - static int pseries_eeh_cap_start(struct pci_dn *pdn) { u32 status; @@ -964,7 +882,6 @@ static int pseries_notify_resume(struct pci_dn *pdn)
static struct eeh_ops pseries_eeh_ops = { .name = "pseries", - .init = pseries_eeh_init, .probe = pseries_eeh_probe, .set_option = pseries_eeh_set_option, .get_pe_addr = pseries_eeh_get_pe_addr, @@ -991,7 +908,77 @@ static struct eeh_ops pseries_eeh_ops = { */ static int __init eeh_pseries_init(void) { - int ret; + struct pci_controller *phb; + struct pci_dn *pdn; + int ret, addr, config_addr; + + /* figure out EEH RTAS function call tokens */ + ibm_set_eeh_option = rtas_token("ibm,set-eeh-option"); + ibm_set_slot_reset = rtas_token("ibm,set-slot-reset"); + ibm_read_slot_reset_state2 = rtas_token("ibm,read-slot-reset-state2"); + ibm_read_slot_reset_state = rtas_token("ibm,read-slot-reset-state"); + ibm_slot_error_detail = rtas_token("ibm,slot-error-detail"); + ibm_get_config_addr_info2 = rtas_token("ibm,get-config-addr-info2"); + ibm_get_config_addr_info = rtas_token("ibm,get-config-addr-info"); + ibm_configure_pe = rtas_token("ibm,configure-pe"); + + /* + * ibm,configure-pe and ibm,configure-bridge have the same semantics, + * however ibm,configure-pe can be faster. If we can't find + * ibm,configure-pe then fall back to using ibm,configure-bridge. + */ + if (ibm_configure_pe == RTAS_UNKNOWN_SERVICE) + ibm_configure_pe = rtas_token("ibm,configure-bridge"); + + /* + * Necessary sanity check. We needn't check "get-config-addr-info" + * and its variant since the old firmware probably support address + * of domain/bus/slot/function for EEH RTAS operations. + */ + if (ibm_set_eeh_option == RTAS_UNKNOWN_SERVICE || + ibm_set_slot_reset == RTAS_UNKNOWN_SERVICE || + (ibm_read_slot_reset_state2 == RTAS_UNKNOWN_SERVICE && + ibm_read_slot_reset_state == RTAS_UNKNOWN_SERVICE) || + ibm_slot_error_detail == RTAS_UNKNOWN_SERVICE || + ibm_configure_pe == RTAS_UNKNOWN_SERVICE) { + pr_info("EEH functionality not supported\n"); + return -EINVAL; + } + + /* Initialize error log lock and size */ + spin_lock_init(&slot_errbuf_lock); + eeh_error_buf_size = rtas_token("rtas-error-log-max"); + if (eeh_error_buf_size == RTAS_UNKNOWN_SERVICE) { + pr_info("%s: unknown EEH error log size\n", + __func__); + eeh_error_buf_size = 1024; + } else if (eeh_error_buf_size > RTAS_ERROR_LOG_MAX) { + pr_info("%s: EEH error log size %d exceeds the maximal %d\n", + __func__, eeh_error_buf_size, RTAS_ERROR_LOG_MAX); + eeh_error_buf_size = RTAS_ERROR_LOG_MAX; + } + + /* Set EEH probe mode */ + eeh_add_flag(EEH_PROBE_MODE_DEVTREE | EEH_ENABLE_IO_FOR_LOG); + + /* Set EEH machine dependent code */ + ppc_md.pcibios_bus_add_device = pseries_pcibios_bus_add_device; + + if (is_kdump_kernel() || reset_devices) { + pr_info("Issue PHB reset ...\n"); + list_for_each_entry(phb, &hose_list, list_node) { + pdn = list_first_entry(&PCI_DN(phb->dn)->child_list, struct pci_dn, list); + addr = (pdn->busno << 16) | (pdn->devfn << 8); + config_addr = pseries_eeh_get_config_addr(phb, addr); + /* invalid PE config addr */ + if (config_addr == 0) + continue; + + pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_FUNDAMENTAL); + pseries_eeh_phb_reset(phb, config_addr, EEH_RESET_DEACTIVATE); + pseries_eeh_phb_configure_bridge(phb, config_addr); + } + }
ret = eeh_ops_register(&pseries_eeh_ops); if (!ret)