3.16.82-rc1 review patch. If anyone has any objections, please let me know.
------------------
From: Paul Osmialowski p.osmialowsk@samsung.com
commit 017210d1c0dc2e2d3b142985cb31d90b98dc0f0f upstream.
This change addresses following problem:
[ 2.560726] ------------[ cut here ]------------ [ 2.565341] WARNING: CPU: 0 PID: 1 at kernel/locking/lockdep.c:2744 lockdep_trace_alloc+0xec/0x118() [ 2.574439] DEBUG_LOCKS_WARN_ON(irqs_disabled_flags(flags)) [ 2.579821] Modules linked in: [ 2.583038] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.18.0-next-20141216-00002-g4ff197fc1902-dirty #1318 [ 2.593796] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) [ 2.599892] [<c0014c44>] (unwind_backtrace) from [<c0011bbc>] (show_stack+0x10/0x14) [ 2.607612] [<c0011bbc>] (show_stack) from [<c04953b8>] (dump_stack+0x70/0xbc) [ 2.614822] [<c04953b8>] (dump_stack) from [<c0023444>] (warn_slowpath_common+0x74/0xb0) [ 2.622885] [<c0023444>] (warn_slowpath_common) from [<c0023514>] (warn_slowpath_fmt+0x30/0x40) [ 2.631569] [<c0023514>] (warn_slowpath_fmt) from [<c0063644>] (lockdep_trace_alloc+0xec/0x118) [ 2.640246] [<c0063644>] (lockdep_trace_alloc) from [<c00df52c>] (__kmalloc+0x3c/0x1cc) [ 2.648240] [<c00df52c>] (__kmalloc) from [<c0394970>] (clk_fetch_parent_index+0xb8/0xd4) [ 2.656390] [<c0394970>] (clk_fetch_parent_index) from [<c0394a6c>] (clk_calc_new_rates+0xe0/0x1fc) [ 2.665415] [<c0394a6c>] (clk_calc_new_rates) from [<c0394b40>] (clk_calc_new_rates+0x1b4/0x1fc) [ 2.674181] [<c0394b40>] (clk_calc_new_rates) from [<c0395408>] (clk_set_rate+0x50/0xc8) [ 2.682265] [<c0395408>] (clk_set_rate) from [<c0377708>] (sdhci_cmu_set_clock+0x68/0x16c) [ 2.690503] [<c0377708>] (sdhci_cmu_set_clock) from [<c03735cc>] (sdhci_do_set_ios+0xf0/0x64c) [ 2.699095] [<c03735cc>] (sdhci_do_set_ios) from [<c0373b48>] (sdhci_set_ios+0x20/0x2c) [ 2.707080] [<c0373b48>] (sdhci_set_ios) from [<c035ddf0>] (mmc_power_up+0x118/0x1fc) [ 2.714889] [<c035ddf0>] (mmc_power_up) from [<c035ecd0>] (mmc_start_host+0x44/0x6c) [ 2.722615] [<c035ecd0>] (mmc_start_host) from [<c035fd60>] (mmc_add_host+0x58/0x7c) [ 2.730341] [<c035fd60>] (mmc_add_host) from [<c037454c>] (sdhci_add_host+0x968/0xd94) [ 2.738240] [<c037454c>] (sdhci_add_host) from [<c0377b60>] (sdhci_s3c_probe+0x354/0x52c) [ 2.746406] [<c0377b60>] (sdhci_s3c_probe) from [<c0283b58>] (platform_drv_probe+0x48/0xa4) [ 2.754733] [<c0283b58>] (platform_drv_probe) from [<c02824e8>] (driver_probe_device+0x13c/0x37c) [ 2.763585] [<c02824e8>] (driver_probe_device) from [<c02827bc>] (__driver_attach+0x94/0x98) [ 2.772003] [<c02827bc>] (__driver_attach) from [<c0280a60>] (bus_for_each_dev+0x54/0x88) [ 2.780163] [<c0280a60>] (bus_for_each_dev) from [<c0281b48>] (bus_add_driver+0xe4/0x200) [ 2.788322] [<c0281b48>] (bus_add_driver) from [<c0282dfc>] (driver_register+0x78/0xf4) [ 2.796308] [<c0282dfc>] (driver_register) from [<c00089b0>] (do_one_initcall+0xac/0x1f0) [ 2.804473] [<c00089b0>] (do_one_initcall) from [<c0673d94>] (kernel_init_freeable+0x10c/0x1d8) [ 2.813153] [<c0673d94>] (kernel_init_freeable) from [<c0490058>] (kernel_init+0x28/0x108) [ 2.821398] [<c0490058>] (kernel_init) from [<c000f268>] (ret_from_fork+0x14/0x2c) [ 2.828939] ---[ end trace 03cc00e539849d1f ]---
clk_set_rate() tries to take clk's prepare_lock mutex while being in atomic context entered in sdhci_do_set_ios().
The solution is inspired by similar situation in sdhci_set_power() also called from sdhci_do_set_ios():
spin_unlock_irq(&host->lock); mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); spin_lock_irq(&host->lock);
Note that since sdhci_s3c_set_clock() sets SDHCI_CLOCK_CARD_EN, proposed change first resets this bit. It is reset anyway (by setting SDHCI_CLOCK_INT_EN bit only) after call to clk_set_rate() in order to wait for the clock to stabilize and is set again as soon as the clock becomes stable.
Signed-off-by: Paul Osmialowski p.osmialowsk@samsung.com Tested-by: Jaehoon Chung jh80.chung@samsung.com Acked-by: Jaehoon Chung jh80.chung@samsung.com Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Ben Hutchings ben@decadent.org.uk --- drivers/mmc/host/sdhci-s3c.c | 8 ++++++++ 1 file changed, 8 insertions(+)
--- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -12,6 +12,7 @@ * published by the Free Software Foundation. */
+#include <linux/spinlock.h> #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/platform_device.h> @@ -312,7 +313,14 @@ static void sdhci_cmu_set_clock(struct s
sdhci_s3c_set_clock(host, clock);
+ /* Reset SD Clock Enable */ + clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); + clk &= ~SDHCI_CLOCK_CARD_EN; + sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); + + spin_unlock_irq(&host->lock); ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock); + spin_lock_irq(&host->lock); if (ret != 0) { dev_err(dev, "%s: failed to set clock rate %uHz\n", mmc_hostname(host->mmc), clock);