From: Greg Kroah-Hartman gregkh@linuxfoundation.org
From: Adrian Hunter adrian.hunter@intel.com
commit 66fbacccbab91e6e55d9c8f1fc0910a8eb6c81f7 upstream.
Avoid the following warning by always defining partition switch time:
[ 3.209874] mmc1: unspecified timeout for CMD6 - use generic [ 3.222780] ------------[ cut here ]------------ [ 3.233363] WARNING: CPU: 1 PID: 111 at drivers/mmc/core/mmc_ops.c:575 __mmc_switch+0x200/0x204
Reported-by: Paul Fertser fercerpav@gmail.com Fixes: 1c447116d017 ("mmc: mmc: Fix partition switch timeout for some eMMCs") Signed-off-by: Adrian Hunter adrian.hunter@intel.com Link: https://lore.kernel.org/r/168bbfd6-0c5b-5ace-ab41-402e7937c46e@intel.com Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson ulf.hansson@linaro.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/mmc/core/mmc.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
--- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -426,10 +426,6 @@ static int mmc_decode_ext_csd(struct mmc
/* EXT_CSD value is in units of 10ms, but we store in ms */ card->ext_csd.part_time = 10 * ext_csd[EXT_CSD_PART_SWITCH_TIME]; - /* Some eMMC set the value too low so set a minimum */ - if (card->ext_csd.part_time && - card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME) - card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME;
/* Sleep / awake timeout in 100ns units */ if (sa_shift > 0 && sa_shift <= 0x17) @@ -619,6 +615,17 @@ static int mmc_decode_ext_csd(struct mmc card->ext_csd.data_sector_size = 512; }
+ /* + * GENERIC_CMD6_TIME is to be used "unless a specific timeout is defined + * when accessing a specific field", so use it here if there is no + * PARTITION_SWITCH_TIME. + */ + if (!card->ext_csd.part_time) + card->ext_csd.part_time = card->ext_csd.generic_cmd6_time; + /* Some eMMC set the value too low so set a minimum */ + if (card->ext_csd.part_time < MMC_MIN_PART_SWITCH_TIME) + card->ext_csd.part_time = MMC_MIN_PART_SWITCH_TIME; + /* eMMC v5 or later */ if (card->ext_csd.rev >= 7) { memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION],