6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: Vishwaroop A va@nvidia.com
[ Upstream commit b4e002d8a7cee3b1d70efad0e222567f92a73000 ]
When the CPU that the QSPI interrupt handler runs on (typically CPU 0) is excessively busy, it can lead to rare cases of the IRQ thread not running before the transfer timeout is reached.
While handling the timeouts, any pending transfers are cleaned up and the message that they correspond to is marked as failed, which leaves the curr_xfer field pointing at stale memory.
To avoid this, clear curr_xfer to NULL upon timeout and check for this condition when the IRQ thread is finally run.
While at it, also make sure to clear interrupts on failure so that new interrupts can be run.
A better, more involved, fix would move the interrupt clearing into a hard IRQ handler. Ideally we would also want to signal that the IRQ thread no longer needs to be run after the timeout is hit to avoid the extra check for a valid transfer.
Fixes: 921fc1838fb0 ("spi: tegra210-quad: Add support for Tegra210 QSPI controller") Signed-off-by: Thierry Reding treding@nvidia.com Signed-off-by: Vishwaroop A va@nvidia.com Link: https://patch.msgid.link/20251028155703.4151791-2-va@nvidia.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-tegra210-quad.c | 22 ++++++++++++++++++++-- 1 file changed, 20 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-tegra210-quad.c b/drivers/spi/spi-tegra210-quad.c index 92348ebc60c78..39aa0f1485686 100644 --- a/drivers/spi/spi-tegra210-quad.c +++ b/drivers/spi/spi-tegra210-quad.c @@ -999,8 +999,10 @@ static void tegra_qspi_handle_error(struct tegra_qspi *tqspi) dev_err(tqspi->dev, "error in transfer, fifo status 0x%08x\n", tqspi->status_reg); tegra_qspi_dump_regs(tqspi); tegra_qspi_flush_fifos(tqspi, true); - if (device_reset(tqspi->dev) < 0) + if (device_reset(tqspi->dev) < 0) { dev_warn_once(tqspi->dev, "device reset failed\n"); + tegra_qspi_mask_clear_irq(tqspi); + } }
static void tegra_qspi_transfer_end(struct spi_device *spi) @@ -1145,9 +1147,11 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi, }
/* Reset controller if timeout happens */ - if (device_reset(tqspi->dev) < 0) + if (device_reset(tqspi->dev) < 0) { dev_warn_once(tqspi->dev, "device reset failed\n"); + tegra_qspi_mask_clear_irq(tqspi); + } ret = -EIO; goto exit; } @@ -1169,11 +1173,13 @@ static int tegra_qspi_combined_seq_xfer(struct tegra_qspi *tqspi, tegra_qspi_transfer_end(spi); spi_transfer_delay_exec(xfer); } + tqspi->curr_xfer = NULL; transfer_phase++; } ret = 0;
exit: + tqspi->curr_xfer = NULL; msg->status = ret;
return ret; @@ -1257,6 +1263,8 @@ static int tegra_qspi_non_combined_seq_xfer(struct tegra_qspi *tqspi, msg->actual_length += xfer->len + dummy_bytes;
complete_xfer: + tqspi->curr_xfer = NULL; + if (ret < 0) { tegra_qspi_transfer_end(spi); spi_transfer_delay_exec(xfer); @@ -1353,6 +1361,7 @@ static irqreturn_t handle_cpu_based_xfer(struct tegra_qspi *tqspi) tegra_qspi_calculate_curr_xfer_param(tqspi, t); tegra_qspi_start_cpu_based_transfer(tqspi, t); exit: + tqspi->curr_xfer = NULL; spin_unlock_irqrestore(&tqspi->lock, flags); return IRQ_HANDLED; } @@ -1436,6 +1445,15 @@ static irqreturn_t tegra_qspi_isr_thread(int irq, void *context_data) { struct tegra_qspi *tqspi = context_data;
+ /* + * Occasionally the IRQ thread takes a long time to wake up (usually + * when the CPU that it's running on is excessively busy) and we have + * already reached the timeout before and cleaned up the timed out + * transfer. Avoid any processing in that case and bail out early. + */ + if (!tqspi->curr_xfer) + return IRQ_NONE; + tqspi->status_reg = tegra_qspi_readl(tqspi, QSPI_FIFO_STATUS);
if (tqspi->cur_direction & DATA_DIR_TX)