From: Arınç ÜNAL arinc.unal@arinc9.com
[ Upstream commit 8f058a6ef99f0b88a177b58cc46a44ff5112e40a ]
Split the code that enables and disables TRGMII clocks and core clock. Move enabling and disabling core clock to mt7530_pll_setup() as it's supposed to be run there.
Add 20 ms delay before enabling the core clock as seen on the U-Boot MediaTek ethernet driver.
Change the comment for enabling and disabling TRGMII clocks as the code seems to affect both TXC and RXC.
Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI Bananapi BPI-R2.
Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e4... Tested-by: Arınç ÜNAL arinc.unal@arinc9.com Signed-off-by: Arınç ÜNAL arinc.unal@arinc9.com Link: https://lore.kernel.org/r/20230320190520.124513-1-arinc.unal@arinc9.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/net/dsa/mt7530.c | 18 ++++++++++++------ 1 file changed, 12 insertions(+), 6 deletions(-)
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index 793992c378559..1ad6c8b44183c 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -391,6 +391,9 @@ mt7530_fdb_write(struct mt7530_priv *priv, u16 vid, /* Set up switch core clock for MT7530 */ static void mt7530_pll_setup(struct mt7530_priv *priv) { + /* Disable core clock */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); + /* Disable PLL */ core_write(priv, CORE_GSWPLL_GRP1, 0);
@@ -404,6 +407,11 @@ static void mt7530_pll_setup(struct mt7530_priv *priv) RG_GSWPLL_EN_PRE | RG_GSWPLL_POSDIV_200M(2) | RG_GSWPLL_FBKDIV_200M(32)); + + udelay(20); + + /* Enable core clock */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_GSWCK_EN); }
/* Setup TX circuit including relevant PAD and driving */ @@ -461,9 +469,8 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) mt7530_write(priv, MT7530_TRGMII_TD_ODT(i), TD_DM_DRVP(8) | TD_DM_DRVN(8));
- /* Disable MT7530 core and TRGMII Tx clocks */ - core_clear(priv, CORE_TRGMII_GSW_CLK_CG, - REG_GSWCK_EN | REG_TRGMIICK_EN); + /* Disable the MT7530 TRGMII clocks */ + core_clear(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN);
/* Setup the MT7530 TRGMII Tx Clock */ core_write(priv, CORE_PLL_GROUP5, RG_LCDDS_PCW_NCPO1(ncpo1)); @@ -480,9 +487,8 @@ mt7530_pad_clk_setup(struct dsa_switch *ds, phy_interface_t interface) RG_LCDDS_PCW_NCPO_CHG | RG_LCCDS_C(3) | RG_LCDDS_PWDB | RG_LCDDS_ISO_EN);
- /* Enable MT7530 core and TRGMII Tx clocks */ - core_set(priv, CORE_TRGMII_GSW_CLK_CG, - REG_GSWCK_EN | REG_TRGMIICK_EN); + /* Enable the MT7530 TRGMII clocks */ + core_set(priv, CORE_TRGMII_GSW_CLK_CG, REG_TRGMIICK_EN); } else { for (i = 0 ; i < NUM_TRGMII_CTRL; i++) mt7530_rmw(priv, MT7530_TRGMII_RD(i),