From: Stephan Gerhold stephan@gerhold.net
commit 996d5d5f89a558a3608a46e73ccd1b99f1b1d058 upstream.
Setting the vibrator enable_mask is not implemented correctly:
For regmap_update_bits(map, reg, mask, val) we give in either regs->enable_mask or 0 (= no-op) as mask and "val" as value. But "val" actually refers to the vibrator voltage control register, which has nothing to do with the enable_mask.
So we usually end up doing nothing when we really wanted to enable the vibrator.
We want to set or clear the enable_mask (to enable/disable the vibrator). Therefore, change the call to always modify the enable_mask and set the bits only if we want to enable the vibrator.
Fixes: d4c7c5c96c92 ("Input: pm8xxx-vib - handle separate enable register") Signed-off-by: Stephan Gerhold stephan@gerhold.net Link: https://lore.kernel.org/r/20200114183442.45720-1-stephan@gerhold.net Signed-off-by: Dmitry Torokhov dmitry.torokhov@gmail.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org
--- drivers/input/misc/pm8xxx-vibrator.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
--- a/drivers/input/misc/pm8xxx-vibrator.c +++ b/drivers/input/misc/pm8xxx-vibrator.c @@ -98,7 +98,7 @@ static int pm8xxx_vib_set(struct pm8xxx_
if (regs->enable_mask) rc = regmap_update_bits(vib->regmap, regs->enable_addr, - on ? regs->enable_mask : 0, val); + regs->enable_mask, on ? ~0 : 0);
return rc; }