From: Pablo Greco pgreco@centosproject.org
[ Upstream commit bd5cdcdc66e1f7179ff6d172d1e5f55e43403aa8 ]
DCDC1 regulator powers many different subsystems. While some of them can work at 3.0 V, some of them can not. For example, VCC-HDMI can only work between 3.24 V and 3.36 V. According to OS images provided by the board manufacturer this regulator should be set to 3.3 V.
Set DCDC1 and DCDC1SW to 3.3 V in order to fix this.
Fixes: 23edc168bd98 ("ARM: dts: sun8i: Add board dts file for Banana Pi M2 Berry") Fixes: 27e81e1970a8 ("ARM: dts: sun8i: v40: bananapi-m2-berry: Enable GMAC ethernet controller") Signed-off-by: Pablo Greco pgreco@centosproject.org Signed-off-by: Maxime Ripard maxime@cerno.tech Link: https://lore.kernel.org/r/1604326755-39742-1-git-send-email-pgreco@centospro... Signed-off-by: Sasha Levin sashal@kernel.org --- arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts index 15c22b06fc4b6..84eb082957183 100644 --- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts +++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts @@ -198,16 +198,16 @@ };
®_dc1sw { - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-name = "vcc-gmac-phy"; };
®_dcdc1 { regulator-always-on; - regulator-min-microvolt = <3000000>; - regulator-max-microvolt = <3000000>; - regulator-name = "vcc-3v0"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; };
®_dcdc2 {