From: Max Chou max.chou@realtek.com
[ Upstream commit cd8dbd9ef600435439bb0e70af0a1d9e2193aecb ]
For chips with security enabled, it's only possible to load firmware with a valid signature pattern. If key_id is not zero, it indicates a security chip, and the driver will not load the config file.
- Example log for a security chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 1 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: cfg_sz 0, total sz 71301 Bluetooth: hci0: RTL: fw version 0x41c0c905
- Example log for a normal chip.
Bluetooth: hci0: RTL: examining hci_ver=0c hci_rev=000a lmp_ver=0c lmp_subver=8922 Bluetooth: hci0: RTL: rom_version status=0 version=1 Bluetooth: hci0: RTL: btrtl_initialize: key id 0 Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_fw.bin Bluetooth: hci0: RTL: loading rtl_bt/rtl8922au_config.bin Bluetooth: hci0: RTL: cfg_sz 6, total sz 71307 Bluetooth: hci0: RTL: fw version 0x41c0c905
Tested-by: Hilda Wu hildawu@realtek.com Signed-off-by: Nial Ni niall_ni@realsil.com.cn Signed-off-by: Max Chou max.chou@realtek.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Sasha Levin sashal@kernel.org ---
LLM Generated explanations, may be completely bogus:
**YES**
drivers/bluetooth/btrtl.c | 24 +++++++++++++----------- 1 file changed, 13 insertions(+), 11 deletions(-)
diff --git a/drivers/bluetooth/btrtl.c b/drivers/bluetooth/btrtl.c index 1d4a7887abccf..52794db2739bf 100644 --- a/drivers/bluetooth/btrtl.c +++ b/drivers/bluetooth/btrtl.c @@ -50,7 +50,7 @@
#define RTL_CHIP_SUBVER (&(struct rtl_vendor_cmd) {{0x10, 0x38, 0x04, 0x28, 0x80}}) #define RTL_CHIP_REV (&(struct rtl_vendor_cmd) {{0x10, 0x3A, 0x04, 0x28, 0x80}}) -#define RTL_SEC_PROJ (&(struct rtl_vendor_cmd) {{0x10, 0xA4, 0x0D, 0x00, 0xb0}}) +#define RTL_SEC_PROJ (&(struct rtl_vendor_cmd) {{0x10, 0xA4, 0xAD, 0x00, 0xb0}})
#define RTL_PATCH_SNIPPETS 0x01 #define RTL_PATCH_DUMMY_HEADER 0x02 @@ -534,7 +534,6 @@ static int rtlbt_parse_firmware_v2(struct hci_dev *hdev, { struct rtl_epatch_header_v2 *hdr; int rc; - u8 reg_val[2]; u8 key_id; u32 num_sections; struct rtl_section *section; @@ -549,14 +548,7 @@ static int rtlbt_parse_firmware_v2(struct hci_dev *hdev, .len = btrtl_dev->fw_len - 7, /* Cut the tail */ };
- rc = btrtl_vendor_read_reg16(hdev, RTL_SEC_PROJ, reg_val); - if (rc < 0) - return -EIO; - key_id = reg_val[0]; - - rtl_dev_dbg(hdev, "%s: key id %u", __func__, key_id); - - btrtl_dev->key_id = key_id; + key_id = btrtl_dev->key_id;
hdr = rtl_iov_pull_data(&iov, sizeof(*hdr)); if (!hdr) @@ -1070,6 +1062,8 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, u16 hci_rev, lmp_subver; u8 hci_ver, lmp_ver, chip_type = 0; int ret; + int rc; + u8 key_id; u8 reg_val[2];
btrtl_dev = kzalloc(sizeof(*btrtl_dev), GFP_KERNEL); @@ -1180,6 +1174,14 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, goto err_free; }
+ rc = btrtl_vendor_read_reg16(hdev, RTL_SEC_PROJ, reg_val); + if (rc < 0) + goto err_free; + + key_id = reg_val[0]; + btrtl_dev->key_id = key_id; + rtl_dev_info(hdev, "%s: key id %u", __func__, key_id); + btrtl_dev->fw_len = -EIO; if (lmp_subver == RTL_ROM_LMP_8852A && hci_rev == 0x000c) { snprintf(fw_name, sizeof(fw_name), "%s_v2.bin", @@ -1202,7 +1204,7 @@ struct btrtl_device_info *btrtl_initialize(struct hci_dev *hdev, goto err_free; }
- if (btrtl_dev->ic_info->cfg_name) { + if (btrtl_dev->ic_info->cfg_name && !btrtl_dev->key_id) { if (postfix) { snprintf(cfg_name, sizeof(cfg_name), "%s-%s.bin", btrtl_dev->ic_info->cfg_name, postfix);