On August 4, 2024 5:11:00 AM Aditya Garg gargaditya08@live.com wrote:
Hi
wpa_supplicant 2.11 broke Wi-Fi on T2 Macs as well, but this patch doesn't seem to be fixing Wi-Fi. Instead, it's breaking it even on older 2.10 wpa_supplicant. Tested by a user on bcm4364b2 wifi chip with a WPA2-PSK [AES] network. dmesg output:
However dmesg outputs more info
Not seeing much info in this output which indicate an issue.
[ 5.852978] usbcore: registered new interface driver brcmfmac [ 5.853114] brcmfmac 0000:01:00.0: enabling device (0000 -> 0002) [ 5.992212] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac4364b2-pcie for chip BCM4364/3 [ 5.993923] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN-u-7.5-X0.bin failed with error -2 [ 5.993968] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN-u-7.5.bin failed with error -2 [ 5.994004] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN-u.bin failed with error -2 [ 5.994041] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-HRPN.bin failed with error -2 [ 5.994076] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4364b2-pcie.apple,maui-X0.bin failed with error -2 [ 6.162830] Bluetooth: hci0: BCM: 'brcm/BCM.hcd' [ 6.796637] brcmfmac: brcmf_c_process_txcap_blob: TxCap blob found, loading [ 6.798396] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4364/3 wl0: Jul 10 2023 12:30:19 version 9.30.503.0.32.5.92 FWID 01-88a8883
This message means the firmware download was completed successfully.
[ 6.885876] brcmfmac 0000:01:00.0 wlp1s0: renamed from wlan0 [ 8.195243] ieee80211 phy0: brcmf_p2p_set_firmware: failed to update device address ret -52 [ 8.196584] ieee80211 phy0: brcmf_p2p_create_p2pdev: set p2p_disc error [ 8.196588] ieee80211 phy0: brcmf_cfg80211_add_iface: add iface p2p-dev-wlp1s0 type 10 failed: err=-52
The creation of P2P device fails, but this only disables P2P aka WiFi-Direct. A full kernel log would be helpful. Even better to build the driver with CONFIG_BRCMDBG and load the driver with modparam 'debug=0x9416'. That will show a lot more driver logging which may provide more clues.
Regards, Arend