5.10-stable review patch. If anyone has any objections, please let me know.
------------------
From: Emanuele Ghidoli emanuele.ghidoli@toradex.com
[ Upstream commit 84a905290cb4c3d9a71a9e3b2f2e02e031e7512f ]
While the DP83867 PHYs report EEE capability through their feature registers, the actual hardware does not support EEE (see Links). When the connected MAC enables EEE, it causes link instability and communication failures.
The issue is reproducible with a iMX8MP and relevant stmmac ethernet port. Since the introduction of phylink-managed EEE support in the stmmac driver, EEE is now enabled by default, leading to issues on systems using the DP83867 PHY.
Call phy_disable_eee during phy initialization to prevent EEE from being enabled on DP83867 PHYs.
Link: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/14452... Link: https://e2e.ti.com/support/interface-group/interface/f/interface-forum/65863... Fixes: 2a10154abcb7 ("net: phy: dp83867: Add TI dp83867 phy") Cc: stable@vger.kernel.org Signed-off-by: Emanuele Ghidoli emanuele.ghidoli@toradex.com Reviewed-by: Andrew Lunn andrew@lunn.ch Link: https://patch.msgid.link/20251023144857.529566-1-ghidoliemanuele@gmail.com Signed-off-by: Jakub Kicinski kuba@kernel.org [ replaced phy_disable_eee() call with direct eee_broken_modes assignment ] Signed-off-by: Sasha Levin sashal@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/phy/dp83867.c | 6 ++++++ 1 file changed, 6 insertions(+)
--- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -664,6 +664,12 @@ static int dp83867_config_init(struct ph return ret; }
+ /* Although the DP83867 reports EEE capability through the + * MDIO_PCS_EEE_ABLE and MDIO_AN_EEE_ADV registers, the feature + * is not actually implemented in hardware. + */ + phydev->eee_broken_modes = MDIO_EEE_100TX | MDIO_EEE_1000T; + if (phy_interface_is_rgmii(phydev) || phydev->interface == PHY_INTERFACE_MODE_SGMII) { val = phy_read(phydev, MII_DP83867_PHYCTRL);