TMU node uses 0 as thermal-sensor-cells, thus thermal zone referencing it must not have an argument to phandle. This was not critical before, but since rework of thermal Devicetree initialization in the commit 3fd6d6e2b4e8 ("thermal/of: Rework the thermal device tree initialization"), this leads to errors registering thermal zones other than first one:
thermal_sys: cpu0-thermal: Failed to read thermal-sensors cells: -2 thermal_sys: Failed to find thermal zone for tmu id=0 exynos-tmu 10064000.tmu: Failed to register sensor: -2 exynos-tmu: probe of 10064000.tmu failed with error -2
Fixes: f1722d7dd8b8 ("ARM: dts: Define default thermal-zones for exynos5422") Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org --- arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi index a6961ff24030..e6e7e2ff2a26 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi +++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi @@ -50,7 +50,7 @@ fan0: pwm-fan {
thermal-zones { cpu0_thermal: cpu0-thermal { - thermal-sensors = <&tmu_cpu0 0>; + thermal-sensors = <&tmu_cpu0>; polling-delay-passive = <250>; polling-delay = <0>; trips { @@ -139,7 +139,7 @@ cpu0_cooling_map4: map4 { }; }; cpu1_thermal: cpu1-thermal { - thermal-sensors = <&tmu_cpu1 0>; + thermal-sensors = <&tmu_cpu1>; polling-delay-passive = <250>; polling-delay = <0>; trips { @@ -212,7 +212,7 @@ cpu1_cooling_map4: map4 { }; }; cpu2_thermal: cpu2-thermal { - thermal-sensors = <&tmu_cpu2 0>; + thermal-sensors = <&tmu_cpu2>; polling-delay-passive = <250>; polling-delay = <0>; trips { @@ -285,7 +285,7 @@ cpu2_cooling_map4: map4 { }; }; cpu3_thermal: cpu3-thermal { - thermal-sensors = <&tmu_cpu3 0>; + thermal-sensors = <&tmu_cpu3>; polling-delay-passive = <250>; polling-delay = <0>; trips { @@ -358,7 +358,7 @@ cpu3_cooling_map4: map4 { }; }; gpu_thermal: gpu-thermal { - thermal-sensors = <&tmu_gpu 0>; + thermal-sensors = <&tmu_gpu>; polling-delay-passive = <250>; polling-delay = <0>; trips {