Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it must be set to 0 when the controller operates in full-speed. See the programming guide for DEPCFG command section 3.2.2.1 (v3.30a).
Cc: stable@vger.kernel.org Fixes: 72246da40f37 ("usb: Introduce DesignWare USB3 DRD Driver") Signed-off-by: Thinh Nguyen Thinh.Nguyen@synopsys.com --- drivers/usb/dwc3/gadget.c | 12 +++++++++++- 1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 97d707b4f384..d0f8d3ec855f 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -605,7 +605,17 @@ static int dwc3_gadget_set_ep_config(struct dwc3_ep *dep, unsigned int action) params.param0 |= DWC3_DEPCFG_FIFO_NUMBER(dep->number >> 1);
if (desc->bInterval) { - params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(desc->bInterval - 1); + u8 bInterval_m1; + + /* + * Valid range for DEPCFG.bInterval_m1 is from 0 to 13, and it + * must be set to 0 when the controller operates in full-speed. + */ + bInterval_m1 = min_t(u8, desc->bInterval - 1, 13); + if (dwc->gadget->speed == USB_SPEED_FULL) + bInterval_m1 = 0; + + params.param1 |= DWC3_DEPCFG_BINTERVAL_M1(bInterval_m1); dep->interval = 1 << (desc->bInterval - 1); }