From: Yannick Vignon yannick.vignon@nxp.com
[ Upstream commit b76889ff51bfee318bea15891420e5aefd2833a0 ]
When configuring a 802.1Qbv schedule through the tc taprio qdisc on an NXP i.MX8MPlus device, the effective cycle time differed from the requested one by N*96ns, with N number of entries in the Qbv Gate Control List. This is because the driver was adding a 96ns margin to each interval of the GCL, apparently to account for the IPG. The problem was observed on NXP i.MX8MPlus devices but likely affected all devices relying on the same configuration callback (dwmac 4.00, 4.10, 5.10 variants).
Fix the issue by removing the margins, and simply setup the MAC with the provided cycle time value. This is the behavior expected by the user-space API, as altering the Qbv schedule timings would break standards conformance. This is also the behavior of several other Ethernet MAC implementations supporting taprio, including the dwxgmac variant of stmmac.
Fixes: 504723af0d85 ("net: stmmac: Add basic EST support for GMAC5+") Signed-off-by: Yannick Vignon yannick.vignon@nxp.com Link: https://lore.kernel.org/r/20210113131557.24651-1-yannick.vignon@oss.nxp.com Signed-off-by: Jakub Kicinski kuba@kernel.org Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/net/ethernet/stmicro/stmmac/dwmac5.c | 52 ++------------------------- 1 file changed, 4 insertions(+), 48 deletions(-)
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac5.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac5.c @@ -572,68 +572,24 @@ static int dwmac5_est_write(void __iomem int dwmac5_est_configure(void __iomem *ioaddr, struct stmmac_est *cfg, unsigned int ptp_rate) { - u32 speed, total_offset, offset, ctrl, ctr_low; - u32 extcfg = readl(ioaddr + GMAC_EXT_CONFIG); - u32 mac_cfg = readl(ioaddr + GMAC_CONFIG); int i, ret = 0x0; - u64 total_ctr; - - if (extcfg & GMAC_CONFIG_EIPG_EN) { - offset = (extcfg & GMAC_CONFIG_EIPG) >> GMAC_CONFIG_EIPG_SHIFT; - offset = 104 + (offset * 8); - } else { - offset = (mac_cfg & GMAC_CONFIG_IPG) >> GMAC_CONFIG_IPG_SHIFT; - offset = 96 - (offset * 8); - } - - speed = mac_cfg & (GMAC_CONFIG_PS | GMAC_CONFIG_FES); - speed = speed >> GMAC_CONFIG_FES_SHIFT; - - switch (speed) { - case 0x0: - offset = offset * 1000; /* 1G */ - break; - case 0x1: - offset = offset * 400; /* 2.5G */ - break; - case 0x2: - offset = offset * 100000; /* 10M */ - break; - case 0x3: - offset = offset * 10000; /* 100M */ - break; - default: - return -EINVAL; - } - - offset = offset / 1000; + u32 ctrl;
ret |= dwmac5_est_write(ioaddr, BTR_LOW, cfg->btr[0], false); ret |= dwmac5_est_write(ioaddr, BTR_HIGH, cfg->btr[1], false); ret |= dwmac5_est_write(ioaddr, TER, cfg->ter, false); ret |= dwmac5_est_write(ioaddr, LLR, cfg->gcl_size, false); + ret |= dwmac5_est_write(ioaddr, CTR_LOW, cfg->ctr[0], false); + ret |= dwmac5_est_write(ioaddr, CTR_HIGH, cfg->ctr[1], false); if (ret) return ret;
- total_offset = 0; for (i = 0; i < cfg->gcl_size; i++) { - ret = dwmac5_est_write(ioaddr, i, cfg->gcl[i] + offset, true); + ret = dwmac5_est_write(ioaddr, i, cfg->gcl[i], true); if (ret) return ret; - - total_offset += offset; }
- total_ctr = cfg->ctr[0] + cfg->ctr[1] * 1000000000ULL; - total_ctr += total_offset; - - ctr_low = do_div(total_ctr, 1000000000); - - ret |= dwmac5_est_write(ioaddr, CTR_LOW, ctr_low, false); - ret |= dwmac5_est_write(ioaddr, CTR_HIGH, total_ctr, false); - if (ret) - return ret; - ctrl = readl(ioaddr + MTL_EST_CONTROL); ctrl &= ~PTOV; ctrl |= ((1000000000 / ptp_rate) * 6) << PTOV_SHIFT;