The patch below does not apply to the 6.12-stable tree. If someone wants it applied there, or to any other stable or longterm tree, then please email the backport, including the original git commit id to stable@vger.kernel.org.
To reproduce the conflict and resubmit, you may use the following commands:
git fetch https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/ linux-6.12.y git checkout FETCH_HEAD git cherry-pick -x 541011dc2d7c4c82523706f726f422a5e23cc86f # <resolve conflicts, build, test, etc.> git commit -s git send-email --to 'stable@vger.kernel.org' --in-reply-to '2025021036-humorist-voltage-3645@gregkh' --subject-prefix 'PATCH 6.12.y' HEAD^..
Possible dependencies:
thanks,
greg k-h
------------------ original commit in Linus's tree ------------------
From 541011dc2d7c4c82523706f726f422a5e23cc86f Mon Sep 17 00:00:00 2001 From: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com Date: Tue, 10 Dec 2024 19:09:33 +0200 Subject: [PATCH] ASoC: renesas: rz-ssi: Terminate all the DMA transactions
The stop trigger invokes rz_ssi_stop() and rz_ssi_stream_quit(). - The purpose of rz_ssi_stop() is to disable TX/RX, terminate DMA transactions, and set the controller to idle. - The purpose of rz_ssi_stream_quit() is to reset the substream-specific software data by setting strm->running and strm->substream appropriately.
The function rz_ssi_is_stream_running() checks if both strm->substream and strm->running are valid and returns true if so. Its implementation is as follows:
static inline bool rz_ssi_is_stream_running(struct rz_ssi_stream *strm) { return strm->substream && strm->running; }
When the controller is configured in full-duplex mode (with both playback and capture active), the rz_ssi_stop() function does not modify the controller settings when called for the first substream in the full-duplex setup. Instead, it simply sets strm->running = 0 and returns if the companion substream is still running. The following code illustrates this:
static int rz_ssi_stop(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm) { strm->running = 0;
if (rz_ssi_is_stream_running(&ssi->playback) || rz_ssi_is_stream_running(&ssi->capture)) return 0;
// ... }
The controller settings, along with the DMA termination (for the last stopped substream), are only applied when the last substream in the full-duplex setup is stopped.
While applying the controller settings only when the last substream stops is not problematic, terminating the DMA operations for only one substream causes failures when starting and stopping full-duplex operations multiple times in a loop.
To address this issue, call dmaengine_terminate_async() for both substreams involved in the full-duplex setup when the last substream in the setup is stopped.
Fixes: 4f8cd05a4305 ("ASoC: sh: rz-ssi: Add full duplex support") Cc: stable@vger.kernel.org Reviewed-by: Biju Das biju.das.jz@bp.renesas.com Signed-off-by: Claudiu Beznea claudiu.beznea.uj@bp.renesas.com Reviewed-by: Geert Uytterhoeven geert+renesas@glider.be Link: https://patch.msgid.link/20241210170953.2936724-5-claudiu.beznea.uj@bp.renes... Signed-off-by: Mark Brown broonie@kernel.org
diff --git a/sound/soc/renesas/rz-ssi.c b/sound/soc/renesas/rz-ssi.c index 6efd017aaa7f..2d8721156099 100644 --- a/sound/soc/renesas/rz-ssi.c +++ b/sound/soc/renesas/rz-ssi.c @@ -415,8 +415,12 @@ static int rz_ssi_stop(struct rz_ssi_priv *ssi, struct rz_ssi_stream *strm) rz_ssi_reg_mask_setl(ssi, SSICR, SSICR_TEN | SSICR_REN, 0);
/* Cancel all remaining DMA transactions */ - if (rz_ssi_is_dma_enabled(ssi)) - dmaengine_terminate_async(strm->dma_ch); + if (rz_ssi_is_dma_enabled(ssi)) { + if (ssi->playback.dma_ch) + dmaengine_terminate_async(ssi->playback.dma_ch); + if (ssi->capture.dma_ch) + dmaengine_terminate_async(ssi->capture.dma_ch); + }
rz_ssi_set_idle(ssi);