6.12-stable review patch. If anyone has any objections, please let me know.
------------------
From: David Collins david.collins@oss.qualcomm.com
[ Upstream commit f8e157ff2df46ddabd930815d196895976227831 ]
Certain TEMP_ALARM GEN2 PMIC peripherals need over-temperature stage 2 automatic PMIC partial shutdown. This will ensure that in the event of reaching the hotter stage 3 over-temperature threshold, repeated faults will be avoided during the automatic PMIC hardware full shutdown. Modify the stage 2 shutdown control logic to ensure that stage 2 shutdown is enabled on all affected PMICs. Read the digital major and minor revision registers to identify these PMICs.
Signed-off-by: David Collins david.collins@oss.qualcomm.com Signed-off-by: Anjelique Melendez anjelique.melendez@oss.qualcomm.com Link: https://lore.kernel.org/r/20250710224555.3047790-2-anjelique.melendez@oss.qu... Signed-off-by: Daniel Lezcano daniel.lezcano@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/thermal/qcom/qcom-spmi-temp-alarm.c | 43 ++++++++++++++++----- 1 file changed, 34 insertions(+), 9 deletions(-)
diff --git a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c index c2d59cbfaea9..a575585c737b 100644 --- a/drivers/thermal/qcom/qcom-spmi-temp-alarm.c +++ b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c @@ -1,6 +1,7 @@ // SPDX-License-Identifier: GPL-2.0-only /* * Copyright (c) 2011-2015, 2017, 2020, The Linux Foundation. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. */
#include <linux/bitops.h> @@ -16,6 +17,7 @@
#include "../thermal_hwmon.h"
+#define QPNP_TM_REG_DIG_MINOR 0x00 #define QPNP_TM_REG_DIG_MAJOR 0x01 #define QPNP_TM_REG_TYPE 0x04 #define QPNP_TM_REG_SUBTYPE 0x05 @@ -31,7 +33,7 @@ #define STATUS_GEN2_STATE_MASK GENMASK(6, 4) #define STATUS_GEN2_STATE_SHIFT 4
-#define SHUTDOWN_CTRL1_OVERRIDE_S2 BIT(6) +#define SHUTDOWN_CTRL1_OVERRIDE_STAGE2 BIT(6) #define SHUTDOWN_CTRL1_THRESHOLD_MASK GENMASK(1, 0)
#define SHUTDOWN_CTRL1_RATE_25HZ BIT(3) @@ -78,6 +80,7 @@ struct qpnp_tm_chip { /* protects .thresh, .stage and chip registers */ struct mutex lock; bool initialized; + bool require_stage2_shutdown;
struct iio_channel *adc; const long (*temp_map)[THRESH_COUNT][STAGE_COUNT]; @@ -220,13 +223,13 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, { long stage2_threshold_min = (*chip->temp_map)[THRESH_MIN][1]; long stage2_threshold_max = (*chip->temp_map)[THRESH_MAX][1]; - bool disable_s2_shutdown = false; + bool disable_stage2_shutdown = false; u8 reg;
WARN_ON(!mutex_is_locked(&chip->lock));
/* - * Default: S2 and S3 shutdown enabled, thresholds at + * Default: Stage 2 and Stage 3 shutdown enabled, thresholds at * lowest threshold set, monitoring at 25Hz */ reg = SHUTDOWN_CTRL1_RATE_25HZ; @@ -241,12 +244,12 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip, chip->thresh = THRESH_MAX - ((stage2_threshold_max - temp) / TEMP_THRESH_STEP); - disable_s2_shutdown = true; + disable_stage2_shutdown = true; } else { chip->thresh = THRESH_MAX;
if (chip->adc) - disable_s2_shutdown = true; + disable_stage2_shutdown = true; else dev_warn(chip->dev, "No ADC is configured and critical temperature %d mC is above the maximum stage 2 threshold of %ld mC! Configuring stage 2 shutdown at %ld mC.\n", @@ -255,8 +258,8 @@ static int qpnp_tm_update_critical_trip_temp(struct qpnp_tm_chip *chip,
skip: reg |= chip->thresh; - if (disable_s2_shutdown) - reg |= SHUTDOWN_CTRL1_OVERRIDE_S2; + if (disable_stage2_shutdown && !chip->require_stage2_shutdown) + reg |= SHUTDOWN_CTRL1_OVERRIDE_STAGE2;
return qpnp_tm_write(chip, QPNP_TM_REG_SHUTDOWN_CTRL1, reg); } @@ -350,8 +353,8 @@ static int qpnp_tm_probe(struct platform_device *pdev) { struct qpnp_tm_chip *chip; struct device_node *node; - u8 type, subtype, dig_major; - u32 res; + u8 type, subtype, dig_major, dig_minor; + u32 res, dig_revision; int ret, irq;
node = pdev->dev.of_node; @@ -403,6 +406,11 @@ static int qpnp_tm_probe(struct platform_device *pdev) return dev_err_probe(&pdev->dev, ret, "could not read dig_major\n");
+ ret = qpnp_tm_read(chip, QPNP_TM_REG_DIG_MINOR, &dig_minor); + if (ret < 0) + return dev_err_probe(&pdev->dev, ret, + "could not read dig_minor\n"); + if (type != QPNP_TM_TYPE || (subtype != QPNP_TM_SUBTYPE_GEN1 && subtype != QPNP_TM_SUBTYPE_GEN2)) { dev_err(&pdev->dev, "invalid type 0x%02x or subtype 0x%02x\n", @@ -416,6 +424,23 @@ static int qpnp_tm_probe(struct platform_device *pdev) else chip->temp_map = &temp_map_gen1;
+ if (chip->subtype == QPNP_TM_SUBTYPE_GEN2) { + dig_revision = (dig_major << 8) | dig_minor; + /* + * Check if stage 2 automatic partial shutdown must remain + * enabled to avoid potential repeated faults upon reaching + * over-temperature stage 3. + */ + switch (dig_revision) { + case 0x0001: + case 0x0002: + case 0x0100: + case 0x0101: + chip->require_stage2_shutdown = true; + break; + } + } + /* * Register the sensor before initializing the hardware to be able to * read the trip points. get_temp() returns the default temperature