From: Vladimir Oltean vladimir.oltean@nxp.com
[ Upstream commit 4ef8d857b5f494e62bce9085031563fda35f9563 ]
When using sub-VLANs in the range of 1-7, the resulting value from:
rx_vid = dsa_8021q_rx_vid_subvlan(ds, port, subvlan);
is wrong according to the description from tag_8021q.c:
| 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | +-----------+-----+-----------------+-----------+-----------------------+ | DIR | SVL | SWITCH_ID | SUBVLAN | PORT | +-----------+-----+-----------------+-----------+-----------------------+
For example, when ds->index == 0, port == 3 and subvlan == 1, dsa_8021q_rx_vid_subvlan() returns 1027, same as it returns for subvlan == 0, but it should have returned 1043.
This is because the low portion of the subvlan bits are not masked properly when writing into the 12-bit VLAN value. They are masked into bits 4:3, but they should be masked into bits 5:4.
Fixes: 3eaae1d05f2b ("net: dsa: tag_8021q: support up to 8 VLANs per port using sub-VLANs") Signed-off-by: Vladimir Oltean vladimir.oltean@nxp.com Signed-off-by: David S. Miller davem@davemloft.net Signed-off-by: Sasha Levin sashal@kernel.org --- net/dsa/tag_8021q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 008c1ec6e20c..122ad5833fb1 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -64,7 +64,7 @@ #define DSA_8021Q_SUBVLAN_HI_SHIFT 9 #define DSA_8021Q_SUBVLAN_HI_MASK GENMASK(9, 9) #define DSA_8021Q_SUBVLAN_LO_SHIFT 4 -#define DSA_8021Q_SUBVLAN_LO_MASK GENMASK(4, 3) +#define DSA_8021Q_SUBVLAN_LO_MASK GENMASK(5, 4) #define DSA_8021Q_SUBVLAN_HI(x) (((x) & GENMASK(2, 2)) >> 2) #define DSA_8021Q_SUBVLAN_LO(x) ((x) & GENMASK(1, 0)) #define DSA_8021Q_SUBVLAN(x) \