From: Jani Nikula jani.nikula@intel.com
commit 1cbc1f0d324ba6c4d1b10ac6362b5e0b029f63d5 upstream.
We try to avoid sending VICs defined in the later specs in AVI infoframes to sinks that conform to the earlier specs, to not upset them, and use 0 for the VIC instead. However, we do this detection and conversion to 0 too early, as we'll need the actual VIC to figure out the aspect ratio.
In particular, for a mode with 64:27 aspect ratio, 0 for VIC fails the AVI infoframe generation altogether with -EINVAL.
Separate the VIC lookup from the "filtering", and postpone the filtering, to use the proper VIC for aspect ratio handling, and the 0 VIC for the infoframe video code as needed.
Reported-by: William Tseng william.tseng@intel.com Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6153 Cc: stable@vger.kernel.org Cc: Ville Syrjälä ville.syrjala@linux.intel.com Signed-off-by: Jani Nikula jani.nikula@intel.com Reviewed-by: Ville Syrjälä ville.syrjala@linux.intel.com Link: https://patchwork.freedesktop.org/patch/msgid/c3e78cc6d01ed237f71ad0038826b0... Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- drivers/gpu/drm/drm_edid.c | 21 ++++++++++++--------- 1 file changed, 12 insertions(+), 9 deletions(-)
--- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -5560,8 +5560,6 @@ static u8 drm_mode_hdmi_vic(const struct static u8 drm_mode_cea_vic(const struct drm_connector *connector, const struct drm_display_mode *mode) { - u8 vic; - /* * HDMI spec says if a mode is found in HDMI 1.4b 4K modes * we should send its VIC in vendor infoframes, else send the @@ -5571,13 +5569,18 @@ static u8 drm_mode_cea_vic(const struct if (drm_mode_hdmi_vic(connector, mode)) return 0;
- vic = drm_match_cea_mode(mode); + return drm_match_cea_mode(mode); +}
- /* - * HDMI 1.4 VIC range: 1 <= VIC <= 64 (CEA-861-D) but - * HDMI 2.0 VIC range: 1 <= VIC <= 107 (CEA-861-F). So we - * have to make sure we dont break HDMI 1.4 sinks. - */ +/* + * Avoid sending VICs defined in HDMI 2.0 in AVI infoframes to sinks that + * conform to HDMI 1.4. + * + * HDMI 1.4 (CTA-861-D) VIC range: [1..64] + * HDMI 2.0 (CTA-861-F) VIC range: [1..107] + */ +static u8 vic_for_avi_infoframe(const struct drm_connector *connector, u8 vic) +{ if (!is_hdmi2_sink(connector) && vic > 64) return 0;
@@ -5653,7 +5656,7 @@ drm_hdmi_avi_infoframe_from_display_mode picture_aspect = HDMI_PICTURE_ASPECT_NONE; }
- frame->video_code = vic; + frame->video_code = vic_for_avi_infoframe(connector, vic); frame->picture_aspect = picture_aspect; frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE; frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;