6.1-stable review patch. If anyone has any objections, please let me know.
------------------
From: Marek Vasut marex@denx.de
[ Upstream commit 98cb72d3b9c5e03b10fa993752ecfcbd9c572d8c ]
Set OV5640_REG_IO_MIPI_CTRL00 bit 2 to 1 instead of 0, since 1 means MIPI CSI2 interface, while 0 means CPI parallel interface.
In the ov5640_set_power_mipi() the interface should obviously be set to MIPI CSI2 since this functions is used to power up the sensor when operated in MIPI CSI2 mode. The sensor should not be in CPI mode in that case.
This fixes a corner case where capturing the first frame on i.MX8MN with CSI/ISI resulted in corrupted frame.
Fixes: aa4bb8b8838f ("media: ov5640: Re-work MIPI startup sequence") Reviewed-by: Jacopo Mondi jacopo.mondi@ideasonboard.com Tested-by: Jacopo Mondi jacopo.mondi@ideasonboard.com # [Test on imx6q] Signed-off-by: Marek Vasut marex@denx.de Tested-by: Jai Luthra j-luthra@ti.com # [Test on bplay, sk-am62] Signed-off-by: Sakari Ailus sakari.ailus@linux.intel.com Signed-off-by: Mauro Carvalho Chehab mchehab@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/media/i2c/ov5640.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c index cc23ff2067f6a..f76bcb395cffa 100644 --- a/drivers/media/i2c/ov5640.c +++ b/drivers/media/i2c/ov5640.c @@ -2531,9 +2531,9 @@ static int ov5640_set_power_mipi(struct ov5640_dev *sensor, bool on) * "ov5640_set_stream_mipi()") * [4] = 0 : Power up MIPI HS Tx * [3] = 0 : Power up MIPI LS Rx - * [2] = 0 : MIPI interface disabled + * [2] = 1 : MIPI interface enabled */ - ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x40); + ret = ov5640_write_reg(sensor, OV5640_REG_IO_MIPI_CTRL00, 0x44); if (ret) return ret;