6.9-stable review patch. If anyone has any objections, please let me know.
------------------
From: Tudor Ambarus tudor.ambarus@linaro.org
[ Upstream commit 7cf0324ba0bc61a8c360d23d284e06d2994b1fef ]
When SPI transfer is being prepared, the spi-s3c64xx driver will call clk_set_rate() to change the rate of SPI source clock (IPCLK). But IPCLK is a gate (leaf) clock, so it must propagate the rate change up the clock tree, so that corresponding MUX/DIV clocks can actually change their values. Add CLK_SET_RATE_PARENT flag to corresponding clocks for all USI instances in GS101 PERIC1: USI{0, 9, 10, 11, 12, 13}. This change involves the following clocks:
PERIC1 USI*:
Clock Div range MUX Selection ------------------------------------------------------------------- gout_peric1_peric1_top0_ipclk_* - - dout_peric1_usi*_usi /1..16 - mout_peric1_usi*_usi_user - {24.5 MHz, 400 MHz}
With input clock of 400 MHz this scheme provides the following IPCLK rate range, for each USI block:
PERIC1 USI*: 1.5 MHz ... 400 MHz
Accounting for internal /4 divider in SPI blocks, and because the max SPI frequency is limited at 50 MHz, it gives us next SPI SCK rates:
PERIC1 USI_SPI*: 384 KHz ... 49.9 MHz
Which shall be fine for the applications of the SPI bus.
Note that with this we allow the reparenting of the MUX_USIx clocks to OSCCLK. Each instance of the USI IP has its own MUX_USI clock, thus the reparenting of a MUX_USI clock corresponds to a single instance of the USI IP. The datasheet mentions OSCCLK just in the low-power mode context, but the downstream driver reparents too the MUX_USI clocks to OSCCLK. Follow the downstream driver and do the same.
Fixes: 2999e786d7e9 ("clk: samsung: gs101: add support for cmu_peric1") Reviewed-by: Peter Griffin peter.griffin@linaro.org Acked-by: André Draszik andre.draszik@linaro.org Signed-off-by: Tudor Ambarus tudor.ambarus@linaro.org Link: https://lore.kernel.org/r/20240419100915.2168573-3-tudor.ambarus@linaro.org Signed-off-by: Krzysztof Kozlowski krzysztof.kozlowski@linaro.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/clk/samsung/clk-gs101.c | 90 ++++++++++++++++++--------------- 1 file changed, 48 insertions(+), 42 deletions(-)
diff --git a/drivers/clk/samsung/clk-gs101.c b/drivers/clk/samsung/clk-gs101.c index 76d4d0fa1168a..bd3c1b02715b5 100644 --- a/drivers/clk/samsung/clk-gs101.c +++ b/drivers/clk/samsung/clk-gs101.c @@ -3239,47 +3239,53 @@ static const struct samsung_mux_clock peric1_mux_clks[] __initconst = { MUX(CLK_MOUT_PERIC1_I3C_USER, "mout_peric1_i3c_user", mout_peric1_nonbususer_p, PLL_CON0_MUX_CLKCMU_PERIC1_I3C_USER, 4, 1), - MUX(CLK_MOUT_PERIC1_USI0_USI_USER, - "mout_peric1_usi0_usi_user", mout_peric1_nonbususer_p, - PLL_CON0_MUX_CLKCMU_PERIC1_USI0_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC1_USI10_USI_USER, - "mout_peric1_usi10_usi_user", mout_peric1_nonbususer_p, - PLL_CON0_MUX_CLKCMU_PERIC1_USI10_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC1_USI11_USI_USER, - "mout_peric1_usi11_usi_user", mout_peric1_nonbususer_p, - PLL_CON0_MUX_CLKCMU_PERIC1_USI11_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC1_USI12_USI_USER, - "mout_peric1_usi12_usi_user", mout_peric1_nonbususer_p, - PLL_CON0_MUX_CLKCMU_PERIC1_USI12_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC1_USI13_USI_USER, - "mout_peric1_usi13_usi_user", mout_peric1_nonbususer_p, - PLL_CON0_MUX_CLKCMU_PERIC1_USI13_USI_USER, 4, 1), - MUX(CLK_MOUT_PERIC1_USI9_USI_USER, - "mout_peric1_usi9_usi_user", mout_peric1_nonbususer_p, - PLL_CON0_MUX_CLKCMU_PERIC1_USI9_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC1_USI0_USI_USER, + "mout_peric1_usi0_usi_user", mout_peric1_nonbususer_p, + PLL_CON0_MUX_CLKCMU_PERIC1_USI0_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC1_USI10_USI_USER, + "mout_peric1_usi10_usi_user", mout_peric1_nonbususer_p, + PLL_CON0_MUX_CLKCMU_PERIC1_USI10_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC1_USI11_USI_USER, + "mout_peric1_usi11_usi_user", mout_peric1_nonbususer_p, + PLL_CON0_MUX_CLKCMU_PERIC1_USI11_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC1_USI12_USI_USER, + "mout_peric1_usi12_usi_user", mout_peric1_nonbususer_p, + PLL_CON0_MUX_CLKCMU_PERIC1_USI12_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC1_USI13_USI_USER, + "mout_peric1_usi13_usi_user", mout_peric1_nonbususer_p, + PLL_CON0_MUX_CLKCMU_PERIC1_USI13_USI_USER, 4, 1), + nMUX(CLK_MOUT_PERIC1_USI9_USI_USER, + "mout_peric1_usi9_usi_user", mout_peric1_nonbususer_p, + PLL_CON0_MUX_CLKCMU_PERIC1_USI9_USI_USER, 4, 1), };
static const struct samsung_div_clock peric1_div_clks[] __initconst = { DIV(CLK_DOUT_PERIC1_I3C, "dout_peric1_i3c", "mout_peric1_i3c_user", CLK_CON_DIV_DIV_CLK_PERIC1_I3C, 0, 4), - DIV(CLK_DOUT_PERIC1_USI0_USI, - "dout_peric1_usi0_usi", "mout_peric1_usi0_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC1_USI0_USI, 0, 4), - DIV(CLK_DOUT_PERIC1_USI10_USI, - "dout_peric1_usi10_usi", "mout_peric1_usi10_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC1_USI10_USI, 0, 4), - DIV(CLK_DOUT_PERIC1_USI11_USI, - "dout_peric1_usi11_usi", "mout_peric1_usi11_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC1_USI11_USI, 0, 4), - DIV(CLK_DOUT_PERIC1_USI12_USI, - "dout_peric1_usi12_usi", "mout_peric1_usi12_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC1_USI12_USI, 0, 4), - DIV(CLK_DOUT_PERIC1_USI13_USI, - "dout_peric1_usi13_usi", "mout_peric1_usi13_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC1_USI13_USI, 0, 4), - DIV(CLK_DOUT_PERIC1_USI9_USI, - "dout_peric1_usi9_usi", "mout_peric1_usi9_usi_user", - CLK_CON_DIV_DIV_CLK_PERIC1_USI9_USI, 0, 4), + DIV_F(CLK_DOUT_PERIC1_USI0_USI, + "dout_peric1_usi0_usi", "mout_peric1_usi0_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC1_USI0_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC1_USI10_USI, + "dout_peric1_usi10_usi", "mout_peric1_usi10_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC1_USI10_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC1_USI11_USI, + "dout_peric1_usi11_usi", "mout_peric1_usi11_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC1_USI11_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC1_USI12_USI, + "dout_peric1_usi12_usi", "mout_peric1_usi12_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC1_USI12_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC1_USI13_USI, + "dout_peric1_usi13_usi", "mout_peric1_usi13_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC1_USI13_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), + DIV_F(CLK_DOUT_PERIC1_USI9_USI, + "dout_peric1_usi9_usi", "mout_peric1_usi9_usi_user", + CLK_CON_DIV_DIV_CLK_PERIC1_USI9_USI, 0, 4, + CLK_SET_RATE_PARENT, 0), };
static const struct samsung_gate_clock peric1_gate_clks[] __initconst = { @@ -3314,27 +3320,27 @@ static const struct samsung_gate_clock peric1_gate_clks[] __initconst = { GATE(CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_1, "gout_peric1_peric1_top0_ipclk_1", "dout_peric1_usi0_usi", CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_1, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_2, "gout_peric1_peric1_top0_ipclk_2", "dout_peric1_usi9_usi", CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_2, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_3, "gout_peric1_peric1_top0_ipclk_3", "dout_peric1_usi10_usi", CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_3, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_4, "gout_peric1_peric1_top0_ipclk_4", "dout_peric1_usi11_usi", CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_4, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_5, "gout_peric1_peric1_top0_ipclk_5", "dout_peric1_usi12_usi", CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_5, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_6, "gout_peric1_peric1_top0_ipclk_6", "dout_peric1_usi13_usi", CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_6, - 21, 0, 0), + 21, CLK_SET_RATE_PARENT, 0), GATE(CLK_GOUT_PERIC1_PERIC1_TOP0_IPCLK_8, "gout_peric1_peric1_top0_ipclk_8", "dout_peric1_i3c", CLK_CON_GAT_GOUT_BLK_PERIC1_UID_PERIC1_TOP0_IPCLKPORT_IPCLK_8,