6.6-stable review patch. If anyone has any objections, please let me know.
------------------
From: Frédéric Danis frederic.danis@collabora.com
commit e2e49e214145a8f6ece6ecd52fec63ebc2b27ce9 upstream.
This is required for passing PTS test cases: - L2CAP/COS/CED/BI-14-C Multiple Signaling Command in one PDU, Data Truncated, BR/EDR, Connection Request - L2CAP/COS/CED/BI-15-C Multiple Signaling Command in one PDU, Data Truncated, BR/EDR, Disconnection Request
The test procedure defined in L2CAP.TS.p39 for both tests is: 1. The Lower Tester sends a C-frame to the IUT with PDU Length set to 8 and Channel ID set to the correct signaling channel for the logical link. The Information payload contains one L2CAP_ECHO_REQ packet with Data Length set to 0 with 0 octets of echo data and one command packet and Data Length set as specified in Table 4.6 and the correct command data. 2. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester. 3. Perform alternative 3A, 3B, 3C, or 3D depending on the IUT’s response. Alternative 3A (IUT terminates the link): 3A.1 The IUT terminates the link. 3A.2 The test ends with a Pass verdict. Alternative 3B (IUT discards the frame): 3B.1 The IUT does not send a reply to the Lower Tester. Alternative 3C (IUT rejects PDU): 3C.1 The IUT sends an L2CAP_COMMAND_REJECT_RSP PDU to the Lower Tester. Alternative 3D (Any other IUT response): 3D.1 The Upper Tester issues a warning and the test ends. 4. The Lower Tester sends a C-frame to the IUT with PDU Length set to 4 and Channel ID set to the correct signaling channel for the logical link. The Information payload contains Data Length set to 0 with an L2CAP_ECHO_REQ packet with 0 octets of echo data. 5. The IUT sends an L2CAP_ECHO_RSP PDU to the Lower Tester.
With expected outcome: In Steps 2 and 5, the IUT responds with an L2CAP_ECHO_RSP. In Step 3A.1, the IUT terminates the link. In Step 3B.1, the IUT does not send a reply to the Lower Tester. In Step 3C.1, the IUT rejects the PDU. In Step 3D.1, the IUT sends any valid response.
Currently PTS fails with the following logs: Failed to receive ECHO RESPONSE.
And HCI logs:
ACL Data RX: Handle 11 flags 0x02 dlen 20
L2CAP: Information Response (0x0b) ident 2 len 12 Type: Fixed channels supported (0x0003) Result: Success (0x0000) Channels: 0x000000000000002e L2CAP Signaling (BR/EDR) Connectionless reception AMP Manager Protocol L2CAP Signaling (LE)
ACL Data RX: Handle 11 flags 0x02 dlen 13
frame too long 08 01 00 00 08 02 01 00 aa .........
Cc: stable@vger.kernel.org Signed-off-by: Frédéric Danis frederic.danis@collabora.com Signed-off-by: Luiz Augusto von Dentz luiz.von.dentz@intel.com Signed-off-by: Greg Kroah-Hartman gregkh@linuxfoundation.org --- net/bluetooth/l2cap_core.c | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-)
--- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -7510,8 +7510,24 @@ void l2cap_recv_acldata(struct hci_conn if (skb->len > len) { BT_ERR("Frame is too long (len %u, expected len %d)", skb->len, len); + /* PTS test cases L2CAP/COS/CED/BI-14-C and BI-15-C + * (Multiple Signaling Command in one PDU, Data + * Truncated, BR/EDR) send a C-frame to the IUT with + * PDU Length set to 8 and Channel ID set to the + * correct signaling channel for the logical link. + * The Information payload contains one L2CAP_ECHO_REQ + * packet with Data Length set to 0 with 0 octets of + * echo data and one invalid command packet due to + * data truncated in PDU but present in HCI packet. + * + * Shorter the socket buffer to the PDU length to + * allow to process valid commands from the PDU before + * setting the socket unreliable. + */ + skb->len = len; + l2cap_recv_frame(conn, skb); l2cap_conn_unreliable(conn, ECOMM); - goto drop; + goto unlock; }
/* Append fragment into frame (with header) */