6.17-stable review patch. If anyone has any objections, please let me know.
------------------
From: Hang Zhou 929513338@qq.com
[ Upstream commit fd9862f726aedbc2f29a29916cabed7bcf5cadb6 ]
On BCM6358 (and also observed on BCM6368) the controller appears to only generate as many SPI clocks as bytes that have been written into the TX FIFO. For RX-only transfers the driver programs the transfer length in SPI_MSG_CTL but does not write anything into the FIFO, so chip select is deasserted early and the RX transfer segment is never fully clocked in.
A concrete failing case is a three-transfer MAC address read from SPI-NOR: - TX 0x03 (read command) - TX 3-byte address - RX 6 bytes (MAC)
In contrast, a two-transfer JEDEC-ID read (0x9f + 6-byte RX) works because the driver uses prepend_len and writes dummy bytes into the TX FIFO for the RX part.
Fix this by writing 0xff dummy bytes into the TX FIFO for RX-only segments so that the number of bytes written to the FIFO matches the total message length seen by the controller.
Fixes: b17de076062a ("spi/bcm63xx: work around inability to keep CS up")
Signed-off-by: Hang Zhou 929513338@qq.com Link: https://patch.msgid.link/tencent_7AC88FCB3076489A4A7E6C2163DF1ACF8D06@qq.com Signed-off-by: Mark Brown broonie@kernel.org Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/spi/spi-bcm63xx.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+)
diff --git a/drivers/spi/spi-bcm63xx.c b/drivers/spi/spi-bcm63xx.c index b56210734caaf..2e3c62f12bef9 100644 --- a/drivers/spi/spi-bcm63xx.c +++ b/drivers/spi/spi-bcm63xx.c @@ -247,6 +247,20 @@ static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
if (t->rx_buf) { do_rx = true; + + /* + * In certain hardware implementations, there appears to be a + * hidden accumulator that tracks the number of bytes written into + * the hardware FIFO, and this accumulator overrides the length in + * the SPI_MSG_CTL register. + * + * Therefore, for read-only transfers, we need to write some dummy + * value into the FIFO to keep the accumulator tracking the correct + * length. + */ + if (!t->tx_buf) + memset_io(bs->tx_io + len, 0xFF, t->len); + /* prepend is half-duplex write only */ if (t == first) prepend_len = 0;