From: Dmitry Baryshkov dmitry.baryshkov@linaro.org
[ Upstream commit dee23b2c9e3ff46d59c5d45e1436eceb878e7c9a ]
Using current settings causes panel flickering on APQ8074 dragonboard. Adjust panel settings to follow the vendor-provided mode. This also enables MIPI_DSI_MODE_VIDEO_SYNC_PULSE, which is also specified by the vendor dtsi for the mentioned dragonboard.
Fixes: ee0172383190 ("drm/panel: Add Sharp LS043T1LE01 MIPI DSI panel") Signed-off-by: Dmitry Baryshkov dmitry.baryshkov@linaro.org Reviewed-by: Neil Armstrong neil.armstrong@linaro.org Signed-off-by: Neil Armstrong neil.armstrong@linaro.org Link: https://patchwork.freedesktop.org/patch/msgid/20230507172639.2320934-1-dmitr... Signed-off-by: Sasha Levin sashal@kernel.org --- drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c index 25829a0a8e801..e2f1e983ef7eb 100644 --- a/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c +++ b/drivers/gpu/drm/panel/panel-sharp-ls043t1le01.c @@ -192,15 +192,15 @@ static int sharp_nt_panel_enable(struct drm_panel *panel) }
static const struct drm_display_mode default_mode = { - .clock = 41118, + .clock = (540 + 48 + 32 + 80) * (960 + 3 + 10 + 15) * 60 / 1000, .hdisplay = 540, .hsync_start = 540 + 48, - .hsync_end = 540 + 48 + 80, - .htotal = 540 + 48 + 80 + 32, + .hsync_end = 540 + 48 + 32, + .htotal = 540 + 48 + 32 + 80, .vdisplay = 960, .vsync_start = 960 + 3, - .vsync_end = 960 + 3 + 15, - .vtotal = 960 + 3 + 15 + 1, + .vsync_end = 960 + 3 + 10, + .vtotal = 960 + 3 + 10 + 15, };
static int sharp_nt_panel_get_modes(struct drm_panel *panel, @@ -280,6 +280,7 @@ static int sharp_nt_panel_probe(struct mipi_dsi_device *dsi) dsi->lanes = 2; dsi->format = MIPI_DSI_FMT_RGB888; dsi->mode_flags = MIPI_DSI_MODE_VIDEO | + MIPI_DSI_MODE_VIDEO_SYNC_PULSE | MIPI_DSI_MODE_VIDEO_HSE | MIPI_DSI_CLOCK_NON_CONTINUOUS | MIPI_DSI_MODE_NO_EOT_PACKET;